OK, next question.

on DJM-800, I use send/return.
on DJM-400, i use master out
how do I connect this effector on a&h xone92? :-)

Looks like there is no send return so your looking at master out again,

http://www.sweetwater.com/images/closeup/750-Xone92_img_rear.jpg

It has AUX and Returns, but I have no idea how it would sound then, I think TRANS and FILTER and that kind effects would not work on AUX, only ECHO, DELAY, REVERB and similar stuff... Anybody have some experience with 92 and efx?

ok . you have 2 sends on any chanell of the mixer (aux 1  , aux 2). you will use one pair of those to send signal in the efx . the return from the efx you can send it to return chanel (you have 2 return chanels, choose one) or to any normal chanel if you have a free one .after the conections done right , dont forget to send signal to the efx ,from any chanel you want with the dials in the top of every chanel (aux 1, aux 2)

omg lol I know that...
professional studio mixers work like that, with external effects like reverbs, delays etc...

my question was how to use effects like TRANS and FILTER, there is no point to have original sound on ch1, and TRANS-formed sound on return channel...
for example I want to use WAH (filter) with TRANS effect on build up, and I have no idea how to do it with aux-es... I need classic send/return for that effect.

Now, I know there are DJ's here that worked with xone92 and efx1000, and I would be happy if they come buy and tell me how they solved that problem :)

you looking for the pre buttons. is below the aux dials. send signal to efx without need chanels is "up"

I found answer on old Pio forums
http://forums-archive.pioneerdj.com/eve/forums/a/tpc/f/1691012904/m...
and I'm not happy with xone92 solutions, xone42 is better from EFX point of view...

hi .. i have got a efx 1000 and it doesnt seem to be functioning properly , 

i have got it set up to my djm 2000 mixer and i cant set it to work on 1 individual channel like just channel 3 for example

i have set it up with the sends and return from the bk of my mixer .. mixer / sends to input on efx ... efx / output to retun on mixer.

my main mater from my active monitors go's to the input on the efx and then from the master output to my mixer

however when i am selecting the send/return on the effects on my mixer an selecting channel to the efx will still come threw on other channels when they are not selected .

can some 1 please help me 

thanks Ryan.

hi .. i have got a efx 1000 and it doesnt seem to be functioning properly , 

i have got it set up to my djm 2000 mixer and i cant set it to work on 1 individual channel like just channel 3 for example

i have set it up with the sends and return from the bk of my mixer .. mixer / sends to input on efx ... efx / output to retun on mixer.

my main master from my active monitors go's to the ,master input on the efx and then from the master output on the efx to the master on my mixer

however when i am selecting the send/return on the effects on my mixer an selecting channel 3 the efx will still come threw on other channels when they are not selected .

can some 1 please help me 

thanks Ryan.

i have an efx 1000 and all i use is the send and return and nothing else.

monitors should goto to the booth on your mixer

and master goes to the PA.

this setup works as expected.

thanks for your reply ... and doing it that way can i set the efx to one channel buy selcting the snd/rtn and selecting the channel i want it on so its not effecting the master ?