Hi all,

First;
Is Pioneer DJM 1000 (instead of the 800) with 2 Pioneer
CDJ-1000 MKIII compatible with Virtual Dj?

Second;
Is Denon DN-X 1500 K Matrix-In-DJ-Mixer with 2 Denon DN-S 3500 compatible with Virtual Dj?

Thirth;
Is Allen & Heath Xone:3D with 2 Stanton C.324 compatible with Virtual Dj?

Suggestions are very welcome! Because its a jungle out there :d

Thanks,
Muis

This message has been edited. Last edited by: Muis,

I quote the answer I got from Virtual Dj.com

"We do not have that mixer in our inventory of mixers that have been tested. However, according to the Pioneer documentation, only the crossfader is assignable via MIDI. With VirtualDJ's MIDI configuration utility you should be able to assign the crossfader to the internal VirtualDJ crossfader. However this is the extent of configuration that could be made with that mixer."

First - we can't discuss competitor's gear.

Second - VirtualDJ's forum is the best place to get answers regarding VirtualDJ software.

Third - what is it you're tying to do with the software that you're asking about the hardware?

Hi, thanks for the reply.

I want to be able to mix cd's and mp3 stored on the computer. So 4 sources to a mixer.

This is the basic principle of what I want to do.

VirtualDJ only offers 2 decks so you'd only have 2 outputs (2 devices).

And the 2 CDJ-1000 MKIII makes 4

Reason for this is that I am not going to burn all my songs to cd.

A laptop with external H.D. and Virtual dj
DJM-800 mixer and 2, CDJ-1000 MKIII

nice
do you think so 2?

Are you new to DJ'ing?

Got my answer from Virtual...

quote:

Yes, with Timecode you can control VirtualDJ, but that is considerably different than a 'controller' like the CDJ-400

quote:

Same answer as your DJM-1000 question. You can use the General MIDI configuration. And as for timecode use with the HS5500 you would need to use the Timecode from a MP3 file on the harddisk of the 5500.

This message has been edited. Last edited by: Muis,

Hey...i use virtual dj5 with my cdj-400 (just bought one in august 08 will get the other and mixer soon). i got a good mapping sequence but i can't get the file info to come up on cdj,the the play/pause, cue, vinyl mode and effects buttons don't illuminate in pc mode either.Why is that? What could i do to fix this? I know there has to be a way to is a way to. thanks and keep up the good work.( by the way... everythings works perfectly with CDs )

The lights won't illuminate because VirtualDJ does not yet support HID mode (aka Native Mode) for the player. It is sending MIDI signal for control TO the computer but not receiving any information.

Thanks for the fast reply, eventually the HID for vdj 5 will be released soon. In relation to my previous question can u explain what i am seeing in this video.http://www.youtube.com/watch?v=uq4-E_cq_Jo thanks.

Also can the djm 400 mixer control the virtual dj 5 crossfader? keep up the good work pulse

No, the 400 mixer isn't midi capable.

ok thanks. What if i leave the virtual dj crossfader in the middle, could i fade between the two decks on the djm 400, since the cdj 400s will be connected to it?

This message has been edited. Last edited by: Bajan0923,

Yep!

Ok, so even though the djm 400 is not MIDI compliant, could i still use the effects on the audio that will be passing through from my laptop since the cdj 400s will be used as controllers? thanks again

In relation to my question about the effects how about the use of the equalizer with audio from the laptop?

Yes - you can do anything to the audio returning from the software via the CDJs to the mixer which you would normally do with any audio running through it.

As for the EQs, it doesn't matter what your source is - just as above, any audio can be manipulated in the same way.

VIRTUAL DJ 5.2 WITH HID SUPPORT FOR CDJ 400S, AT LONG LAST IT IS HERE. i know i may be late but i am very excited about it.

I'll have to hassle the guys to send me an updated version of that - I didn't know they had released the HID support!