Hey,
I've bought a used djm900. It's in a perfect condition.
But one problem exist. If i connected my XDJ to ch4 i got only a signal on the left side. The same is by the cue for ch4.
All other channels are okay. What can i do?
Greetz Martin
In that case, unfortunately it sounds like it's a hardware fault (could be as simple as a bad connection from the input), please contact Pioneer DJ technical support in your region to have the DJM serviced and repaired.
Post ist für Kommentare geschlossen.
Have you reversed the L and R connections on ONE END of the cable to eliminate the possibility of it being a faulty cable / output from the XDJ?
Yes, i did. I've changed the cable and the sources in all ways.
The right Output of ch4 had no signal.
If i use ch4 in USB Mode it works perfectly.