DJM 2000 Nexus no post fader on channels with RMX 1000

Crickets in here.... LOL Gavin. Pulse. Anyone???? :)

That's the way it works and I don't think it can be changed by firmware. I think the 900nexus works the other way but don't hold me to that as I don't own one. 

Use the a and/or b channels

Thanks Morgo... That sucks!!! Not really a fan of having it just work with the master. Wonder why they would do that?? @ Marsano... Use the A/B channels? How? I was wondering what those were for? Do I need to assign the A/B channels? I will read up on it. Any help would be much appreciated. TY

Ahhhh ok Marsano.... A/B is the cross fader... I will have to change the way i mix to use it that way.... But I guess I can do it.. Gavin if your reading this thread I would still like and Definent answer on the post fader being able to work with the channels. TY

Gave it a try with A/B selected and it does work. But i would REALLY like it to work with the channels selected. GAVINNNNNNNNNNNNNNNNNNNN... Can I get an answer please? TY

I haw DJM-900 nexus, and it works just the same way. I would like to drop down the fader and lett the effekt blure out and throw in the music, but thats not working :-( i hope its an option to do that!

Same here!!!!!

I would love it if the djm would have post fader on the channels!!

You can't let your effect bleed out the way it works now :(

i'm also hoping for a solution !!

I'm mainly concerned with the RMX post fader effects not working with my DJM 2000 Nexus on the channels. Especially when it works on every other mixer like that. And if I remember correctly??? It was marketed that way as well when it was first release.

It must be as my EFX-1000 is post fader on the DJM-2000. On your cross fader assign, assign channels 1 and 2 to A then 3 and 4 to B then just use the A and B channel effect select to make all effects post fader

Thank you Marsano :-) Omg finaly, i have don it so mtch harder for my self!!!!

Yes I know that I can use the A/B channels and assign my channel accordinly. But it shouldn't have to work like that. It should work that if we select a channel. we should have a post fader effect on that channel even if the channels are set to "thru" which is where I like to keep my settings. I don't make sense having to do it that way?? There must be an answer??

no worries, i actually find it harder using 1,2,3,4 on the effects, it's much easier using A and B for left or right deck. It can just be a bit tricky when using more than 2 inputs though

thank you marsano for the tip!!

I didn't know that !

It works that way , But I would still prefer that the channels are post fader...

It's not the ideal way of working...

I'm pretty sure post fader is a hardware feature and i doubt it can be applied with a firmware update. The A and B solution is a work around

This doesn't have anything to do with the tropic , but do you still hear the "pop" noise when you switch from effect channel ?

When I switch the effect channel from 2 to 3 or an other channel , I hear a "pop" sound. not always , but most of the time.

It has been reported a long time ago ( more then a year)

Do you still have this on the Djm Nexus ?

I have not heard a popping sound on the djm 2000 nexus.