If there's any problems I have with the 2000 Nexus, this is it. I don't know why this happens, but they do drift quite a bit. I hope there is a solution here soon.
Post
FolgenDrifting problem with Nexus Cdj 2000s
When setting a 4 beat loop (or any loop) I have serious drifting! On every track!
How can I be "more creative" when I can't even set a loop without hearing the Grand National!
I'm having tracks freezing, not letting me start my cue points without stuttering - total BALLS!
Everything is through Rekordbox, beat grids checked.
I cannot believe how bad these decks are.
My plan was to buy 3 decks - thank f**k I only bought 2.
You have led me to contact the shop where I bought these as I have had no help whatsoever from the mods on here.
I really do not know what else to say here.
Post ist für Kommentare geschlossen.
13 Kommentare
No drifting on mine I have to say are you sure RB has been checked properly ?
Sounds like your doing something wrong. No drifting here either.
Well I'm not sure that Rekordbox is 100 percent reliable (but thats another debate lol). I have checked the beat grids and set the 1st cue point on the 1st beat as I always did with my CDJ 2000 Mk1s.
I tried using about 20 tracks which I used on my CDJ 2000 Mk1s - every track drifted out when I set a loop?
Try the same track on both decks, at the same speed. Do the loops drift now?
Lots of my tracks drift, it's not just one. I don't get why this happens. Regardless of the grid, wouldn't the track still stay in time if you beat matched it?
make sure dynamic mode is not ticked in rekordbox
I have tried the same track at the same speed (infact I have tried a few) and the drifting is definately there when using Loops.
I know this was an issue with the CDJ 2000 Mk1s a while ago. I really can't believe I'm having this problem all over again.
I bought these decks really thinking Pioneer would have it right this time, especially after all the problems with the MK1s.
Dynamic mode is not ticked.
I forgot to mention that I'm using a usb stick which I formated (FAT 32) before loading the tracks on.
No drifting here, I have FWD here.
Make sure quantize is switched on as well, after that not sure what the problem is, My own are fine
Quantize is on, dynamic is off, and my tracks are analyzed. I am still getting drifting within loops.
If you post a link to a track you're experiencing problems with ill test it for you.