CDJ2000, DJM2000, Traktor and Komplete Audio 6

Guys,

I'll try to explain a little better: 

I'm really struggling to get my set up for Traktor integration and recording mixes, I would really appreciate some help.

I've followed the tutorial at the link below and can't get the PC to recognise any sound from Traktor via routing when using these settings. i.e. using the DJM2000 as the primary audio source. I'm using 4.32 CDJ firmware and 3.2 in the DJM2000 so latest drivers.

https://www.youtube.com/watch?v=pqaXOy_Tzj0

The only setting I seem to be able to use Traktor with sound is as follows, this enables the CDJ2000's to control Traktor in HID mode:

Audio set up: Device - Pioneer CDJ2000

Output Routing:

Output deck 1 - CDJ2000 1L, CDJ2000 1R

Output deck 2 - CDJ2000 2L, CDJ2000 2R

Input routing - not connected (there isn't an option of drop down here)

Neither Traktor or Audacity recognises any audio coming from the DJM2000 when I attempt to record on these settings. I have tried the settings as described in the URL above using the DJM2000 Asio setting but still no luck when trying to playback or record. The sound is coming from booth monitor speakers I have plugged direct in the back of the DJM2000 XLR to TRS (Adam A7x)

Can someone confirm what I'm doing wrong as it has my head done in - sorry in advance if this is something really basic that I'm missing?

I want to be able to use the CDJ's to control Traktor, whilst using the DJM2000 to mix each Traktor channel and the ability to record the mix in Traktor, what's the best way of achieving this? Do I need to route cables out of the DJM2000 record out/maste into the Komplete Audio 3/4 inputs using RCA to 1/4 jack ?

Thanks a lot in advance for your support.

BW

Mark

Guys,

I've bitten the bullet and sought advice from a local audio shop and they advised to hook up the DJM2000 to the Komplete Audio 6 via RCA to 1/4 inch jack. I've done this via the input 1 and 2 on the front of the Audio and seem to be able to record via Audacity on the either the DJM2000 line or Komplete Audio 6 Inout 1/2 (which I'll use the latter).

I'm still using Traktor in Pioneer CDJ2000 Asio mode to recognise audio, the DJM2000 mode will not recognise any audio when using the Pioneer DJM2000 sound driver. I'm using a PC on Windows 7 64, is this the issue?

I want to be able to use the DJM2000 as an external mixer for Traktor whilst being able to browse and launch tracks on the CDJ's, they are being used in advanced HID mode as it stands as again this is the only set up I can get audio to work.

I have seen videos on MIDI mapping effects to the touch screen on the DJM, I also want to use this type of functionality - how do I go about fixing this?

Slightly outdated (no HID), but still relevant: https://www.youtube.com/watch?v=pqaXOy_Tzj0