Have a feature request or suggestion? Post your idea here!

Post

2 Follower Folgen
0
Avatar

[CLOSED] Rekordbox and Wireless issue with XDJ R1

1) I played all mp3 tracks on a USB without rekordbox analyzation.

I was able to get 60 minutes in without an issue as far as that goes.  I used FX and it was fine and straight up.

 

2) Next I made a rekordbox playlist of MP3 only tracks to play on the R1 via USB.

I had issues like- tempo drifting, sync issues, and loop drifts but the unit did not freeze up and I had wireless completely off.

I do find the USB reads slower with Rekorbox content and takes longer to load.

 

3) Next I used USB with MP3 files analyzed Rekordbox content and turned on the wireless feature on my phone.  Once the wireless feature was turned on I lost deck 1 completely.  I could not get the volume up on it at all.  I looked through my phone and every level was up and nothing was functioning even though the track was loaded and showing it was playing.  I did have faint sound through my speaker but levels would not work on machine or phone.  Trim was up on my phone but once I moved it back and forth a few times the music started to blare through the speaker.  After that everything was fine.

My question is -

When you turn the wireless feature on- are the controls starting at the current value that is set on your decks?

Or is it starting from a reset value that can only be controlled via your wireless device?  Just trying to figure this out.  It seems if I start a set with it on things go okay.  If I am in a middle of a set then turn it on things get weird.

 

So my freezing and screams I had in the unit are caused by AIFF files which I sent one of my files to GAVIN at pioneer.  My sync and temp drift issues have to be caused by Rekordbox analyzed content which load slower and seem to be glitchy.

Plain old non-analyzed MP3 files work fine with this unit just so everyone knows.

 

 

 

 

jobushwick

Post ist für Kommentare geschlossen.

2 Kommentare

0
Avatar

Just wanted to add that non-RB analyzed files have incorrect BPM readings on the unit and also loops are even worse, another downside of files not run through RB is you can only browse by folder.  In regards to wireless control of the decks, transport and playback is not affected, but effects are, when you use your wireless device to control the effects the hardware controls are some how enable, when you press a button on the unit whatever that effect is it is enabled on the hardware even if you reset it on the wireless device, doesn't matter if you have software takeover on or off, the difference I found between takeover on or off is in order to reset the effects on the hardware you have to turn the color knob all the way to the right when takeover is on and only slightly to the right when it is off (an unnecessary step imo) which I think they can fix with a FW update.

BTD10 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Yes raw and un-analyzed files will require you to use your ears and you won't be able to use a lot of the features on this unit.

I just wanted to point it out in case someone was left with no other options and needed to use R1

 

jobushwick 0 Stimmen
Aktionen für Kommentare Permalink