My left master channel signal has begun to cut out intermittently. It 1st happened at home, playing at regular/low levels on monitors. I though might be bad xlr cable so switch them out, issue went away.
Was then playing out and channel cut out during a set. I tried un plugging/replugging xlr but didn't seem to effect it. It kept cutting in/out on different tracks.
Was in the green on line levels/gains as well as master.
Any thoughts on what might cause? Should I swap out the left male master out and see if fixes it before having to send it in for service?
@Jeff > Looks like you've taken the proper steps to troubleshoot the problem. The mixer seems to be the likely culprit. It could be something as simple as a loose solder connection or possibly something more complex. Unfortunately, there is no way to know without taking a look under the hood. You can find a local service here or you can initiate a factory repair here.
Post ist für Kommentare geschlossen.
Additional info: I was playing though a Serato SL3 box, happened on both channels 1/3 and 2/4.