DJM 2000 NSX2 Magvel Fader

Is there any other way to adjust this fader to make the cuts tighter? Even set on the tightest setting of the 3 settings on the mixer the cuts are too far out for me, Im used to using an innofader..I read somewhere that it can be set down to 0.03mm accuracy by changing settings in the utilities menu, But on further inspection i cant find it, which leads me to believe it was possibly a setting on the S9 scratch mixer only?
Anyway, could pulse or one of the other mods let me know if there is any more adjustment to be had from this crossfader somehow?

Thanks.

aaron elliott 19. Juni 2016 20:35 Beantwortet

Post ist für Kommentare geschlossen.

Datum Stimmen

4 Kommentare

I don't believe there is any adjustment for the lag distance on the DJM-2000NXS Magvel crossfader, but I'll ask the product team to verify.

Pulse 20. Juni 2016 17:33 0 Stimmen

Just to confirm, did you mean the DJM-900NXS2 or DJM-2000NXS?

Pulse 20. Juni 2016 17:33 0 Stimmen

Thanks for the reply Pulse, I meant the 900 NSX2, Could you confirm if what i had read about the adjustability on the S9 mixer is true? I realise it may be a completely different magvel fader than the one in the 900 NSX2, But it would be interesting to know if an extra setting in the utilities menu was possible in the future.

aaron elliott 20. Juni 2016 17:56 0 Stimmen

The DJM-S9 has the Magvel Pro; the DJM-900NSX2 has just the regular Magvel, which does not have the same adjustability as the Pro model, sorry.

Pulse 20. Juni 2016 18:31 0 Stimmen