XDJ-RX3 connect to laptop with Rekordbox

Hi all,

I just bought an XDJ RX3. I would like to connect my laptop with Rekordbox to the RX3. I assume that this way I can access the playlists in Rekordbox on my laptop via the RX3 (instead of always exporting everything to a separate USB stick).

I connect the laptop via the USB cable to the USB port on the back of the RX3 and click on the 'Source' button. Here I find the 'Software Control' option which I select. Then the 2 load buttons flash. I press both.

Then I can't do anything. I don't see any playlists, no tracks, nothing.

In Rekordbox on my laptop I changed the audio driver to XDJ-RX3 ASIO via 'settings'.

Am I doing something wrong? I can't figure it out anymore and hope you can help me

Jarig Soepboer 25. Oktober 2023 13:05

Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.

Datum Stimmen

7 Kommentare

RB has to be in export mode and you most likely need a driver if you are using a pc

in page 31 of the manual it explains it

rekordbox Link Export
You can directly select and play tracks in rekordbox with this unit when the unit is connected
via a USB cable to a PC/Mac running rekordbox. You can play tracks with cues, loops, and
Hot Cues previously set in rekordbox.
• Install the rekordbox (Mac/Windows) USB connection (Link Export) driver software before
connecting the unit to a PC/Mac with a USB cable (page 13).
• For information on the connection with rekordbox for iOS, refer to the FAQ at the URL
below.
rekordbox.com/support/faq/connecting-to-dj-units/
• You can’t use mobile devices running rekordbox for Android with the unit.

BriChi 25. Oktober 2023 15:28 0 Stimmen

It worked! :D

Thanks!!

Jarig Soepboer 25. Oktober 2023 17:57 0 Stimmen

You record your performance using Serato while the bug is happening, does the recorded output also have out-of-sync FX?
Entrepreneur

Kenworthyson Partor 15. Oktober 2025 08:25 0 Stimmen

If you’re having trouble connecting your XDJ-RX3 to Rekordbox on your laptop, it’s likely due to either the connection mode or Rekordbox settings. Make sure your XDJ-RX3 firmware and Rekordbox software are both fully updated, then connect via USB and select ‘Software Control’ on the RX3 as you did. In Rekordbox, ensure that the device is recognized under Preferences → Audio → Audio Device, and that the correct library view is enabled so your playlists and tracks appear. Sometimes restarting both the laptop and RX3 resolves the connection glitch. It’s similar to how professional deep cleaning services Dubai follow precise steps and use the right tools to achieve flawless results—attention to detail is key to making the system work properly.

Munix Aheld 18. November 2025 19:24 0 Stimmen

To use your XDJ-RX3 with Rekordbox on a laptop, make sure Rekordbox is in Performance mode, the RX3 driver is installed, and the RX3 is selected as the audio device; after connecting via the rear USB-B port and choosing Software Control, your Rekordbox playlists should appear on the RX3 screens—if not, it’s usually due to being in Export mode or a driver issue, and you can test search/input features with examples like a Myanmar keyboard online typing.

Salvim Kelvot 22. Dezember 2025 18:50 0 Stimmen

Ensure Rekordbox is in Export mode and the RX3 firmware is updated, then reconnect and select Software Control again. Just like trademark registration in UAE, following the correct setup steps makes the process smooth and hassle-free.

Halex Utrex 26. Dezember 2025 17:55 0 Stimmen

It sounds like the RX3 is connected, but Rekordbox may not be set to the correct Export or Performance mode, which is required for playlists to appear. Double-check the Rekordbox mode and USB connection settings, then restart both devices and try again. Just like planning activities in Dubai, setup steps matter one small setting can block the whole experience.

Halex Utrex 30. Januar 2026 18:43 0 Stimmen