Quick Q on my XDJs which have been playing up lately since my mum and nephew were on them over Xmas (lol)… I have two isses with the same controller. I've loaded my settings onto both decks with my USB yet they're acting differently...
Issue 1 - none of the loop buttons will work when I load my USB settings on one of the controllers (+In/4Beat, loop exit etc). Weirdly it works on the other when I load the same settings?! The reloop/exit button light is also off.
Issue 2 - on the same controller, the jog wheel doesn’t work despite being in vinyl mode. Instead of jogging slightly to tweek the timing, it skips the track completely when the job wheel is clicked in or it isn't.
Any ideas? I think it's most certainly an issue with settings and not hardware! My settings are as follows:|
Play Mode:|Single / Off| |Eject / Load:|Unlock| |Needle Lock:|Lock| |Quantize Beat Value:|1 Beat| |Hot Cue Auto Load:|On| |Hot Cue Colour:|Off| |Auto Cue Level:|Memory Cue| |Time Mode:|Remain| |Auto Cue:|On| |Jog Mode:|Vinyl| |Tempo Range:|10| |Master Tempo:|Off| |Quantize:|On| |Sync:|Off| |Phase Meter:|Type 1| |Waveform / Phase Meter:|Waveform| |Waveform Divisions:|Phrase| |Vinyl Speed Adjust:|Touch| |Beat Jump Beat Value:|16 Beat|
Thanks in advance!
Joe
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Try updating the firmware to the latest version, re-exporting your tracks with quantize enabled in rekordbox, and testing with a different USB drive (FAT32 format). If that doesn’t help, a factory reset or contacting Pioneer support might be the way to go.
I’d love to see better support for the Pioneer XDJ-700. At the moment there are recurring issues with connectivity and firmware compatibility that make it tricky to use reliably. An update or dedicated fix to improve stability and ensure smoother integration would make a big difference for DJs eggy car who depend on this model in live setups.
You record your performance using Serato while the bug is happening, does the recorded output also have out-of-sync FX?
It’s likely a settings glitch, not hardware. Re-export your Rekordbox settings, reset the faulty XDJ-700 to factory defaults, and reload the USB preferences. Ensure Quantize is on and Vinyl Mode sensitivity isn’t too high. Even small setting changes—like tiny menu tweaks at Harvey’s Chestermere menu—can cause big differences in performance.
Sounds like the issues with your Pioneer XDJ-700 are likely related to corrupted or conflicting settings on the USB rather than hardware faults. For the loop buttons not working and the reloop/exit light being off, try performing a factory reset on the problematic controller and then reloading your USB settings—sometimes the decks don’t fully sync settings if the internal memory has lingering conflicts. For the jog wheel skipping tracks in vinyl mode, double-check that “Vinyl Mode” is properly enabled and consider recalibrating the jog wheel via the system menu. Ensuring both decks have identical firmware versions can also prevent these inconsistencies. Think of it like consulting a specialist such as Dr gina sims gastroenterologist sometimes you need an expert reset or recalibration to get everything functioning smoothly!
In order to resolve this issue, you can update the firmware to the most recent version, export your songs again using rekordbox with quantise enabled, and try trying on a different USB drive that is formatted in FAT32. If it still doesn't work, you might want to try calling Pioneer support or doing a factory reset.
If your Rx3 deck 1 cue button has stopped working while deck 2 works fine and the auto cue is already off, it’s likely a hardware issue with the button itself or a loose internal connection, so try powering down and reconnecting the deck, checking for firmware updates, or gently cleaning around the cue button; if the problem persists, it may need professional servicing. Meanwhile, you can still monitor live audio using deck 2 or other channels, similar to how Dubai’s 1 AC Cleaning handle multiple audio inputs for smooth playback.
Re-export your Rekordbox settings, reset the faulty XDJ-700 to factory defaults, and reload the USB preferences. Ensure Quantize is on and Vinyl Mode sensitivity isn’t too high. Even small setting changes—like tiny menu tweaks at elegent properties—can cause big differences in performance.
Issues with the Pioneer XDJ-700 are usually not random—it’s often one of a few common causes tied to setup, USB, or firmware rather than the hardware itself.
Sounds like a strange issue, especially since both decks are loaded with the same USB settings. For the loop buttons not working and the jog wheel skipping instead of nudging, try checking if the deck is accidentally in a different mode like Beat Jump or Key Sync. Also, try loading a fresh USB backup or resetting that specific deck to factory defaults before reloading your settings. On a completely different note, if you ever need a fun break from troubleshooting gear, you can brawl mod apk download from a site that offers a popular modded game for stress-free entertainment. Hope you get the XDJs sorted soon.
On the XDJ, each deck can either remember or ignore USB settings depending on the configuration: Go to MENU tap tap shots → UTILITY → LOAD SETTINGSMake sure both decks are set to the same ON or OFF state.
Bij PROFESSORNL hanteren we een ethische werkwijze en zullen we nooit verboden stoffen kopen of verkopen. Benzodiazepinen Kopen
Benzodiazepines