Stantalone, Fw 1.32 with the brake speed swivel to 3/4, the brake
is applied approximately in one second when
pressing play / pause, it is correct. Under the same conditions, when holding the wheel, sometimes it acts as a brake
and sometimes stops, as if it were a vinyl. I can not repeat the brake effect with the pulse,
with the necessary security to be able to do it
live without failing. For the future in upcoming performances, this utility
could be improved using for example SHIFT + wheel, to
brake and only wheel, to stop as if it were vinyl
on all occasions, or to be able to change the
sensitivity of the jog according to the rotary
of the braking time. Thank you
If you are trying to brake when using the jog surface -- it you move the jog ever so slightly it will think you're scratching and nullify the braking effect.
Short answer: don't use the jog surface to try and brake.
Post ist für Kommentare geschlossen.
I understand, that the answer is not to use it, it is normal, it is what I do, since it is not reliable to use it but it could be made reliable with an improvement of the FW. When I gently support the fingers on the jog wheel, apply a brake effect, or slip brake, if I have the slip mode activated, but not always, about half the time. That's why I do not use it, because it does not always work the same, as you suggest, but stability could be improved in the future, thanks