BPM Issue

Got it. Thank you.

Is there a "reset" button internally? My controller is within a hard case and while I'm in the process of organizing my music, I don't want to have to open it just to reset a track.

Also, any reason as to why Pioneer decided not to allow it to "snap back?" What benefit is there in -not- going back to its original BPM once you deselect SYNC?

It's called a "hardware pickup" where the hardware has to match the last position of the software in order to avoid issues where you accidentally bump the hardware and the software pitch value immediately jumps to the hardware position.

If you don't want this to occur, simply disable SYNC and any songs loaded to either deck will remain at the pitch set by the hardware pitch fader.

Thanks for the explanation on the "hardware pickup."

As for the pitch. What I was asking is if there's a way to reset the pitch without using the hardware, since i didn't want to have to unpack and plug my controller every time I wanted to reset a track. Sorry if that wasn't clear. Either way, I think I found a way. I just typed the original BPM into the jog wheel in Rekordbox. Can you just please confirm that 1) this won't cause any issues if playing out live (throwing the balance off in some way or causing other issues I'm not thinking of?) and 2) Is this the best way to achieve what I was asking without using the hardware at all?

Again, I forget to mention that even when SYNC is disabled, when I unload the track and add the same track back again, it still has the other deck's BPM for some reason. Is this a bug or just something that happens until you reset it the way I did or by using the controller?

If you had previously had sync enabled, or the hardware pitch fader was in that position, then that's where the pitch will be. If you never had SYNC enabled, and the pitch fader is at 0%, rekordbox will always load the tracks at their default 0% pitch.

If you're not using the hardware at all, and don't have the SYNC enabled, it won't change the pitch for any track by itself.

You can always enable a keyboard shortcut to reset the pitch (required for each deck):

Thanks. That'll do. It works. But it would be nice not to have to reset it for a track that doesn't have SYNC enabled.

So let me confirm with you. Is this a bug in the program? Because I don't have SYNC enabled and yet it still does, in fact, change the pitch for the track. Does Rekordbox have a memory of some sort, because that has to be the issue. If I've loaded a track in the past and had SYNC enabled at that specific point in time, but then REMOVED the track, disabled SYNC and then added that track BACK into the deck, it won't read the original pitch, but rather the SYNC'ed pitch (even though, again, SYNC is disabled).

By the way, just to be clear. When I say, "Because I don't have SYNC enabled and yet it still does, in fact, change the pitch for the track." I don't mean for a NEW song, but as mentioned above, for a song that I had accidentally added while the SYNC was enabled. If the SYNC is off and I add that same track again? It STILL syncs the tracks even though the SYNC is off. However, if the SYNC is off and I add a DIFFERENT song, then it'll retain that songs original BPM, which is why I assume that RB has some kind of memory associated with each track.

To sum: Why exactly does it SYNC the track I had previously added even though the SYNC option is not on? Is this a bug? If not, is there any way to correct this issue?

You'll have to show a video of this happening so I can explain it to our engineers.

Here you go: