Offizieller Kommentar
It should work, tested and we found that Aux comes out of the booth. Maybe check your cables from the booth out.
Aktionen für Kommentare
Post
Folgen
Dude AUX audio by Booth
Xdj RX2 Fw 1.35, stand alone mode
Aux channel, audio does not come out by Booth
I've only tried it once, and I do not know if it could be a hardware problem or it's generic.
I use a sampler that I connect to the AUX input, and it sounds perfect for the Master output, but not for the monitors (Booth)
Has anyone else tried it?
As soon as I can I try it again ...
Thank you
Post ist für Kommentare geschlossen.
Datum
Stimmen
4 Kommentare
The cables are apparently fine.
I use an AKAI MPX 16 sampler to shoot my samples, and by master it finishes correctly, but I have verified that sometimes it fails because of the BOOTH output, only the sound of the AUX channel, the rest of the sound, goes well through the BOOTH OUTPUT.
I'll keep doing tests, to see if I find the problem, thanks ...
Aktionen für Kommentare
Could it be the levels weren't set correctly? I've tested it here myself and the AUX does indeed output to the booth and master, and there is no option in the hardware to disable that.
Aktionen für Kommentare
it is possible that the signal increase in the position +12 dB, added to a sampler with excess output signal, is the problem that the signal is cut off for a while, tests with lower input sensitivity ...
Aktionen für Kommentare