This is something that I remember being able to do in a previous version of Rekordbox. Today I am running Rekordbox 5.8.1 on a Windows 10 laptop. I have my two CDJ2000NXS2 connected to my DJM900NXS2 via RCA cables and all the gear connected via Ethernet cable through a Ethernet hub (ProLink).
I have connected a USB cable from the DJM900NXS2 to my laptop. I changed the software to Performance Mode. On the mixer I changed the Source selector to "A". On the CDJ's I have pressed the Link button - Pressed the Rotary button to enter Control Mode (DJM-USB A), pressed the Rotary button again when asked to "Push to Connect". Once this is done I see that I can control my laptop from the CDJ's. The WAV forms are shown on the screen as well. When I press the Play button I see the WAV move. But I do not see the Level indicator change on Channel 1 and I do not see anything in the Master Levels.
What am I doing wrong or what step has I missed? Thanks for your help.
@Leo > Did you set the DJM-900NXS2 as your audio device within the rekordbox preferences? You'll need to also verify the output channel assignments within for each of the virtual decks.
Post ist für Kommentare geschlossen.
Thanks for getting back to me. After a reboot the connection and the audio started working. Apparently after I installed the windows drivers for the DJM900NXS2 on my new laptop I needed to reboot. Again thanks for replying.