Offizieller Kommentar
Hey Tyler,
I'd connect it via the Send/Return loop on the DJM, that way you could use the FX as well as capturing from any source without interrupting the output.
Aktionen für Kommentare
Post
Folgen
Akai MPX to DJM-900NXS
Hi, I'm looking to incorporate a small sampler (i.e. Akai MPX series) to play pre-recorded samples (e.g. claps/hi-hats/snares, etc) to my current set-up of two (2) CDJ-2000s connected to a DJM-900NXS mixer.
I also want to use the FX of the DJM to affect the sound of the samples, as well.
Is there anyway to accomplish this? Would connecting the ¼" outputs to the RCA line in of another channel on the mixer work?
Post ist für Kommentare geschlossen.
Datum
Stimmen
3 Kommentare
Hi, Pulse:
Would input the ¼" outputs of the Akai into the Send or the Return terminals?
As far as I understand, if Send/Return is selected on the Effect Selector, I will not be able to utilize the effects of the DJM, correct?
Aktionen für Kommentare
DJM Send > Akai Input
Akai Output > DJM Return
Sorry, you are correct - I was thinking about the DJM-900NXS2 which has the S/R on a separate section from the FX; yes, you would lose the ability to run the FX at the same time, but you'd still have the color FX.
I wouldn't recommend connecting it post-master and then returning to a channel as you run the risk of a feedback loop if you ever forget and have the live audio going out to the MPX then back to the mixer ... then back to the MPX, then mixer, etc.
Aktionen für Kommentare