DJM 900nxs weak sound?

Im recording from Technics1210 through DJM 900nxs to my laptop running Audacity. The sound is TOO low when going throug. I have set everything to suggested points, but nothing changes. No video or thread helps me.. :(

Sebastian Eriksen 16. April 2020 20:56

Offizieller Kommentar

Have you adjusted the USB Out level in the setting utility?

Pulse 16. April 2020 21:13

Post ist für Kommentare geschlossen.

Datum Stimmen

11 Kommentare

Yes..

Sebastian Eriksen 16. April 2020 21:17 0 Stimmen

Everything is setup, as shown in every thread. I havent found a thread about my type of problem...

Sebastian Eriksen 16. April 2020 21:21 0 Stimmen

Do you possibly have the turntable connected to your LINE input and not the PHONO input?

Pulse 16. April 2020 21:22 0 Stimmen

Yes, i had actually. But when i turn to PHONO - no sound at all comes out

Sebastian Eriksen 16. April 2020 21:23 0 Stimmen

Any ideas?

Sebastian Eriksen 16. April 2020 21:53 0 Stimmen

Audacity can record voice, or computer-sound at normal wavelength/height.
And DJM 900nxs plays normal with my soundsystem.

BUT not with the USB..

Sebastian Eriksen 16. April 2020 22:00 0 Stimmen

So what you're saying is Audacity doesn't capture ANY audio from the mixer? If you're using a Mac, have you allowed Audacity to access the mic (audio input) through the System Preferences > Security & Privacy > Privacy > Microphone?

Pulse 17. April 2020 00:04 0 Stimmen

Audacity captures sound, but it is as low as can be.. It can only get to my listening pleasure being cranked in volume but hence being distorted as f...

Sebastian Eriksen 17. April 2020 01:44 0 Stimmen

cranked in volume in audacity that is.

Sebastian Eriksen 17. April 2020 01:45 0 Stimmen

Are you on a Mac or PC?

Pulse 18. April 2020 04:09 0 Stimmen