Have a feature request or suggestion? Post your idea here!

Post

2 Follower Folgen
0
Avatar

DDJ400 + Windows 10 Home gives no sounds

Hey guys,

 

I just got DDJ400 and I plugged it to amplifier but it's gives absolutely no sounds - screen below

 

As you see rekordbox actually playing something but there are no sounds passed from software at all. I did my own research which led me to new drivers from the site https://www.pioneerdj.com/pl-pl/support/software/controller/ddj-400/ I did update but nothing happened. I checked Device Manager and DDJ400 is recognized correctly.. To me personally it all looks like a drivers issue that I cannot overcome. I checked all details from the site https://faq.pioneerdj.com/product.php?c=658&lang=en&p=DDJ-400&t=faq everything is set as per those instructions.

 

I want to clarify one thing - I'm new in this field and I might have missed something. Guys please help me out. It would be much appreciated

 

Cheers 

Kamil Osiczański

Post ist für Kommentare geschlossen.

Datum Stimmen

14 Kommentare

0
Avatar

Hi Kamil,

Do you have the DDJ-400 selected as the audio device within rekordbox, but also NOT in use by Windows as an output device?

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Hey,

Thanks for quick response. 

Below you can find my current setup :

 

In my recognition - it should looks like this. If I'm wrong, please correct me.

Kamil Osiczański 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Okay, so you need to switch the Windows default audio output back to your internal audio device, not the 400.

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

I just did but as you see in red rectangle there no green volume there at all. No sounds recognized 

Interesting thing is - when I pull out USB cable (original dedicated for DDJ-400) my laptop immediately catch sounds. That's why I thinks issue is about soft. I'm still stuck.

Kamil Osiczański 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Can you please try disabling the PC Master Output in rekordbox to see if it works normally?

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Sadly still nothing. Any other ideas? If I will not solve it until Monday, I will return it to store and instead buy Serato. I'm kinda disappointed because I thought Pioneer could deliver good quality equipment..

Kamil Osiczański 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

@Kamil > You don't have anything assigned on the rekordbox master output....

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

"Can you please try disabling the PC Master Output in rekordbox to see if it works normally?

Pulse   "

 

You asked me to do it in previous comments - it was done and still nothing has happen. If you would scroll higher in this thread, you would see screenshot with visible PC Master Output as DDJ400 and still no sounds. Any other ideas?

Kamil Osiczański 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Here...

Yes, the PC MASTER should be disabled, but you should still have the DDJ-400 WASAPI : MASTER in that box.

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Un-check the box at the top of the Audio page, right beneath the DDJ-400 device as the selected audio interface:

Pulse 0 Stimmen
Aktionen für Kommentare Permalink
0
Avatar

Guys thanks for all tips but controller came in with broken motherboard. Now it's been replaced and it's works fine. Cheers

Kamil Osiczański 0 Stimmen
Aktionen für Kommentare Permalink