So, I recently bought a XDJ-RX2 because I've loved my RX(1).
A bit of my problem is my own fault because i didn't check whether the RX2 had a ethernetport for using link in the same way i use it on the old one.
But here is the thing.... I can get the RX2 to link with recordbox using the USB cable and if I turn of the RX2 and turn on the RX I can use LINK through the ethernetport. The thing is that I want them both to be able to LINK to the same computer at the same time. Just so they both always have full access to my entire library. I guess this is something that was never tested during development? Is there anything we can do to get this working?
Regards
Kris
Yes, install the USB Link drivers and it will then create a network bridge over the USB connection. This was changed because new MacBooks and other Ultrabooks are doing away with ethernet ports.
Post is closed for comments.
And yes, you can link them both - your OS just has to allow those two networks to communicate. If you're on a PC, make sure they're both set to PRIVATE (or HOME), not one PRIVATE and one PUBLIC.