This function automatically sets the cue point ( P. 15) just before actual
sound begins when a disc is loaded, or when performing track search or
changing tracks.
If the search continues for ten seconds without finding the point, the
cue point is set at the track’s beginning.
¶ Turning auto cueing on and off
Pressing the TIME MODE/AUTO CUE button and holding it down
for a second or more causes auto cueing to be alternately turned on
and off.
When AUTO CUE is on, the [A.CUE] indicator will be lit up.
¶ AUTO CUE on/off status is stored in memory and persists even
when the power is turned off.
¶ It can change the AUTO CUE level.
7 Changing the AUTO CUE level
1. Press the TIME MODE/AUTO CUE button for over 5 seconds.
¶ The display will indicate [A.CUE–60db] (in the original state).
2. Press the CUE LOOP CALL button (2, 3) to change the
level.
¶ It can choose from –36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB,
–72 dB and –78 dB.
¶ When the TIME MODE/AUTO CUE button is pressed or 15 seconds
elapses, the level change mode is canceled.
¶ Even if you turn the power off, the set level will remain in memor