EUROLITE LED PR-100/32 Pixel DMX Rail

Hello dear fixture team.

You are my last hope in this and I hope the implementation of this light will work out the way I hope for. Please read all the way to the end, I explain how the tube would usually be intended for use and how my use case looks like specifically.

Name of Manufacturer and fixture model: EUROLITE LED PR-100/32 Pixel DMX rail bk

• Fixture type: Tube Light (or PIXEL Bar/Tube Light, its complicated...)
• Manual is found here: https://www.steinigke.de/download/51928608-Manual-132781-1.100-eurolite-led-pr-100-32-pixel-dmx-rail-bk-de_en.pdf
• Product Page: https://www.steinigke.de/en/mpn51928608-eurolite-led-pr-100-32-pixel-dmx-rail-bk.html this is the product page.
• DMX Channel Modes: This is where things get interesting. Please read the following part.

The user manual specifies these things about DMX-adjacent topics:

• Tube with 96 high power RGB LEDs (3in1) for light effects
• Subdivided into 32 pixels (illumination units à 3 LEDs) which can be controlled individually by DMX
• Auto, music, master/slave and DMX mode
• Functions: static colors, automatic color change, internal programs with variable speed, dimmer settings
• Built-in auto and music show programs
• Direct color selection for 17 preset colors
• 3, 5, 8, 48 or 96 DMX channels selectable
• DMX and power terminals intelligently designed for easy wiring
• Sound-control via built-in microphone with adjustable microphone sensitivity

This table further clarifies:

In the following sections, more is explained about the actual channels:

8-Channel mode is wht I want to use for all three of these bar fixtures I plan on using (it can go up to 8 and I will add more over time)

Please continue reading this part, as it is most important for me:

I want to have DMX Control over Channels 6-8. These are the programs that are the most important for this light to work. I NEED to be able to control these Channels while I have DMX connected. Otherwise this light is useless:

• My ideal scenario: 8 Channel Mode works flawlessly - All Channels are part of the automated scenes RB Lighting plays during my songs.
• My compromise: 5 Channel Mode works together with me setting Channels 7 & 8 (Internal Program and Running Speed) manually through direct control. I want to atleast be able to set Channel 7 & 8 at the beginning of my set, then leave that and have Channels 1-5 (Dimmer, Colours and Strobe) be automated during my scenes.

Thank you for reading this!

Feel free to write again if questions remain. I would love for the “EUROLITE LED PR-100/32 Pixel DMX Rail” fixture to have its own place in the RB Lighting compatibility list and have the fixture actually work to some degree! Otherwise I will have to re-sell my equipment.

Greetings,

Felix Krell