
@Marsano > Aggregates are only necessary if you're combining multiple soundcards (in the case of the 2000, the input card and the output card, which are separate, should you be using 6/2 mode).
I recently purchased a DJM 2000 and 2 CDJ 2000's, so far everything is absolutely perfect with no issues that i have been reading on here..... except maybe one. Up until now i could only get Traktor to see 2 outputs, no matter what aggregate device combinations i tried it would only see 2 outputs, don't get me wrong it worked fine but the only annoying thing was that Traktor would only output to the same channels on my mixer that my CDJ's were plugged into, meaning there was no possibility for 4 deck mixes/cueing. Anyway today i decided to select 'DJM 2000 output' in the audio settings of Traktor and now i can assign all four decks to any of the 4 channels on my mixer and my CDJ's work how they should, PERFECT!!! The whole Aggregate device crap threw me way off. I'm a very happy bunny now and i hope this helps anyone having the same issues.
Peace
Post is closed for comments.
@Marsano > Aggregates are only necessary if you're combining multiple soundcards (in the case of the 2000, the input card and the output card, which are separate, should you be using 6/2 mode).
I have selected the 6/2 mode, but it's showing 'please check your output routing' in traktor when I have chosen DJM-2000 as output device. Do I have to connect my mac and mixer with anything else than the usb cable to get this to work or what have I possibly done wrong?
Have you booted in 32bit mode (hold 3 and 2 when starting up your mac) as traktor doesn't recognise the mixer in the default 64bit mode
Thank you very much! That was just what I needed.
Hi Marsano,
What is your wiring configuration. do yo have USBs connected to both CDJs and one to the DJM?
Also did you select internal mixer or external on the traktor setup menu?
And finally with your current setup are you able to use the DJM touch pads to control 2 decks on Traktor?
Thanks.
@ Hoomzy > Yes i have three USB's plugged into my mac via a USB hub, in the Traktor menu select 'External Mixer'. There is a .tsi file floating about on the forum some where, if you load that then you can use the midi functions of the mixer, just make sure (for mac) your in 32bit mode (hold 3 and 2 when booting up) and to select 'DJM2000 output' in the settings of Traktor. If you want to use all four channels of you mixer make sure to select 8 channels in the DJM2000 settings utility.
Thanks Marsano,
Got it all up and running last night finally, Yippi!. Cheers for the tips.
Couldnt find the .TSi file anywhere. So i have started mapping it my self. half way through it and will hopefully finish it today.
Thanks
Just to update this thread - the 64bit drivers for the DJM-2000 are now available for download in the firmware/drivers forum.
Hi friend, can someone explain me how to install traktor mapping for DJM2000? thanks
It's very simple. Open Traktor, open to preferences, go to controller manager and at 'device manager' at the top, you can find the add button. Choose import and find your .tsi file.
-Alfe
Hi everybody, just downloaded the new firmware for djm 2000, but for some reason it wont run the new firmware, ive done all the obvious things like turned firewall and airport off closed all apps down but when i double click firmware im gettin nothing.
HELP
Thank Alfe !. not yet find that file tsi, where I can download it ?....only found this http://www.speedyshare.com/files/23622999/DJM-2000.tsi but it's just a script, which I do with this ?, thank a lot dude.
Hector G.( A.K.A. EXtorDj )
@phildw01 > Please start your own thread; that has nothing to do with Traktor.
@Hector - You should just wait til the countdown reach 0. Then you're able to click the download button.
Alfe
Hi Alfe, when countdown reach 0 and click the button download appears this script, what I do with this?, thanks dude,
Hector G.
<SNIP>
Please don't post chunks of code like that.
You need to SAVE the file to your desktop, then import it into Traktor.
I agree with Pulse :-D
I agree with Pulse and Alfe! :)
Im confused. Some say it wont work with traktor, some say it will and does. So now when I know this it works with traktor - Can I use effects of the mixer while playing with traktor ?? So: djm 2000 plus x2 cdj 2000 all connected with usb. Can I use djm 2000 effects ??
@Martin > Why are you spreading your questions across several threads - including old, dead, threads?
Yes you can use the effects while playing with Traktor.
Im sorry to bother you with my questions. I rather go and spend my money on pioneer products so you can get money for doing [EDIT]
@Martin > We ask you to keep your questions in one place so we can easily track them and not answer the same question over and over. Neither Pulse nor I are paid. But if that is your attitude, we'd rather you didn't participate here at all. Profanity will not be tolerated, these are family orientated boards.
its not about me want to participate on here or not. You seams to be tired of questions that you cant really answer. I am willing to get Pioneer gear but befor i do this I want to be 100% sure what Im getting.
In general I'm Pioneer very big fan. ( had Pioneer gear back in 90s, 00s)
I'm sorry to post a question in dead thread but I thought that if I ask same question again you will find this a same good reason to jump on me as you did it now.
Some forums don't like it when you ask same question over and over again. If you are in charge on here your personality should be rather different ;-)
@Martin > We're here to answer questions, but you're asking multiple questions about the same product in various different threads, including this old one in which the original post has nothing to do with the question you're asking. We're not tired of answering them, or even the same ones over and over (because in that case, we create a FAQ or point you to an answer in another thread).