[SOLVED] DJM-900 Fader start problem

First you must set Fader Start function on in Mixer setup settings. (see page 22 of your user manual)

I have the same issue. Can someone help please?

I have turned on the FS from the utility menu on the DJM 900 and push the button 1-4 and nothing happens.  I am using digital cables to connect the 2 cdjs to the mixer, if that matters.

Thanks

Fader start on the DJM900 works over the ProDJ Link. I'm assuming you all have a network cable connecting the three units....?

yes everything is hooked up right. 

CDJs have an Ethernet cable going to a 5 port switch and DJM has a Ethernet cable going to the same switch and the switch hooked up to the laptop using another Ethernet cable. I know it's all hooked up right because the link works with the same cables and setup in RB.

Is there anything to turn on on the CDJ? I couldn't find anything on that.

Thanks for the response.

if you're using 1 and 4 make sure your decks are set to deck 1 and deck 4 in the CDJ menu

If they are, make a quick video of what you are doing, maybe we can pickup on something that is wrong

Thanks for the replies guys.  Problem solved.

I did not change anything and everything worked tonight.  I guess all I had to do was reboot everything after I made the change.

Cheers