Hi Guys,
im having problems with a Pioneer DJM-800 mixer, i can power it up but after it started non of the inputs work,
i have try'd digital in with CDJ2000 CD Players, Phono In with technics 1200 turntables, line in with RCA and an iphone and cdj2000 analog RCA cables.
non of the VU meters are showing a signal, trim low mid high are all set to 50% and i have checked everything. still no input going into the mixer
Can someone help me with troubleshooting this problem.
With Kind Regards,
Erwin.
Post is closed for comments.
Some new information, after powering down and powering up the mixer af few times, the digital inputs started to work ( all four of them ), but non of the analog inputs work. Both phono and line (analog) dont work.
With Kind Regards,
Erwin.
Hi Erwin,
As I doubt you will find a solution to your problem here, I will say that obviously something is really wrong with your 800 and not worth the risk of taking it to a gig...You should find a local dealer that will look at it for you to give you a professional opinion as to what is actually wrong with your unit so you can determine if it's worth fixing.