It's advised u don't use the RMX on the master out as its possible to create a feedback loop and blow ur speakers big time. I also would love to use a combination of djm900 and RMX effects but don't want to destroy my set-up.
[SOLVED] Limitations of using RMX100 on master channel?
I really like the look of the RMX 1000 but just want to check what functions I will not be able to use when using the unit on the master channel rather than a send/return. Setup at the moment is 2 djm850's and a DJM400 so I'd be connecting the RMX 1000 to the djm400 master output. I know that this means that I will always be effecting the master rather than individual channels but are there any other functions that won't work in the same way?
Also, have the problems encountered when using the unit with Logic 9 been sorted in the update?
Thanks for your help,
Post is closed for comments.
As long as you don't route the output from the RMX back into one of the channels of the mixer, there is no loop. The downside to using the RMX post-master is that you can only effect the master outputs, you're not able to individually select the channel on which you are applying effects.
I believe the original Logic issue was corrected, if not, it's coming soon.
Hi, Im really bad with connections. What way can I connect RMX to SVM 1000, I was looking at the back of the SVM and it has no jack connection send/returns slots. Would I put the phono output from RMX into Master output on SVM and thats it, is there any other ways I could set them up together? Thanks for your help
@ldh You can connect RMX-1000 to Master Out or between the CDJ and SVM.
Check page 6-7 in the RMX-1000 Manual for setup options, see link below.
Thanks for putting the link up! Cheers:)