Hello Community,
i have an problem with my djm 900 nexus and my rmx 1000. I put my rmx 1000 into my djm 900 send and return slot. (yes @Rmx is send and return activated)
Send is in the input and return in the output. But nothing came from the rmx :( I see that input is comming from the mixer. But if i make effects and claps no sound came.
Somebody have an idea ?
Post is closed for comments.
your send & return seem right, just check you have the correct settings on the mixer,you should have level depth at least halfway ,your effect selector rotary knob should be selected to send & return,& your effects on/off button should be on obviously.i know you may have done this but it is easy to miss something in haste to get going.hope this helps.
@Pascal > Did you get this resolved?
does anybody know how to setup the rmx 1000 with the dim 900 nexus thank you
a little vague if you tell us a little more of your set up johnny we will try to help.what excactly are you having difficulty with ?, what cables are using to connect ?,what settings are using?etc
i have my 1/4 inch mono cables to the send of mixer
i have my 1/4 inch mono cables connected to the send of my mixer i see the levels of the rmx i have the send and return on my mixer and the rmx but still don't get any sound threw the speakers
ok johnny have you pressed the effects on/off button its the white on bottom right on the mixer underneath level depth rotary knob
so for cables you should have 4 TR or TRS cables into left/right from send on mixer into the same on input of rmx & return on the mixer to the outputs on the rmx its easy to get these crossed double check.
@Johnny > Lets start from scratch - you have four 1/4in cables - two going from the Send on the Mixer to the Input on the RMX and two going from Output on the RMX to the Return on the mixer.
Then, on the mixer, you have selected the channel you want to apply the effect to and engaged the On / Off switch (also on the mixer).
Did you get it to work now?
This topic has been closed due to inactivity. Should you require future assistance with this issue, please create a new topic describing the problem and provide the URL of this topic as reference.