Hey guys, I've read through so many topics to try get an answer for what's wrong. My equipment are 2 CDJ 350's and a DJM 350 running Traktor Pro.
I recently moved home from university of which everything worked perfectly but now I'm home everything runs through one channel which means it must be a simple problem that I just can't seem to fix. I've re-imported the mapping again in case it was that and I've attached the output routing picture. I have also even attached a picture of the wiring in case that helps. One of the pictures shows that sound is supposed to be playing through the second channel on Traktor but it doesn't go through the mixer in the second channel like it's supposed to.
Post is closed for comments.
@Ryan > Windows 8 OS right? Have you downloaded the necessary drivers and software files from the Pioneer DJ Support site?
Available here: http://pioneerdj.com/support/product.php?lang=en&p=CDJ-350&t=96
Yeah, everything has been working for around 2 months now then I take them home and they stop working. Also to add I tried running it without any use of the laptop or software (just using CD's) and the same thing happened
@Ryan > If you've taken the laptop out of the equation and just tried CDs and you're still only getting sound from one channel then that points to a problem with the other channel. Do you get a reading on the VU meter of the channel that isn't working? Have you tried swapping around the cables in case they are damaged?
Sorry if this is a bit too obvious and you know already, but the input switch on your DJM-350 for channel 2 is set to 'Phono', yet you have it plugged in on CD-Line input.
@Ryan > Any update?
Closing thread due to lack of response - if issues persist please open a new thread.