0) Have you read the "READ ME FIRST" thread in its entirety before posting: Yes, I swear it!
1) Operating System: OSX 10.8
2) OS Type: 64bit
3) Rekordbox version: 2.1.1 (and earlier)
4) Using LINK: Yes
4a) LINK Connection method: DJM2000 - at the moment via cisco switch, see below
4b) Using with CDJs: 2x CDJ2000MK1
5) Hard drive / Flash drive / SD card file system: FAT32
5a) Does the device have multiple partitions: No
5b) If it's a flash drive, is it a U3 device: No
5c) With what utility did you format the device: OSX and HP util
6) Have you scanned your files for errors:Yes
7) Have you scanned your drive for errors:Yes
8) Is Rekordbox crashing at all: No
9) Are you able to repeat / reproduce the problem: Yes
9a) If yes, can you do it consistently: Yes
10) Any other notes regarding your setup only:
Provide as much detail of the issue here:
When I use either my 1TB Lacie or 750GB Samsung external USB drive with about 15k songs on it exported from RB, both formatted FAT32 and with no other files on it, loading takes quite some time, 5 seconds or so with [USB]. When using the [LINK] it can take longer. Searching also takes some time, 10+ seconds easy.
2x CDJ 2000 MK1
Tried direct link to each other, linked via DJM-2000, linked via a switch, different cables etc..
I have also tried it with my USB connected to my Macbook Pro with Rekordbox and LAN cable to the DJM. When is do this, loading is instantly, works like a charm. But I don't want to use my Mac, just external USB drive.
Is there anyone with the same experience? Is it because of the amount of tracks?
@Brichi: You have a lot of tracks too I noticed, can you tell me how you handle this and what your experiences are? Thanks!
