
Are you using the RMX with a DJM mixer that has send/returns? If so, you must make sure the send/return is engaged.
Hi,
On my rmx-1000 i am detect bug - if all 3 knobs (isolate fx) on default (vertical) position and if we enabling any of isolate fx (for example transe\roll) - sounds not changing BUT sound indication level increases on 1-2 db.
Looks like this is firmware bug.
Post is closed for comments.
Are you using the RMX with a DJM mixer that has send/returns? If so, you must make sure the send/return is engaged.
Rmx works and all effects applies. But level indicator jumps when nothing changes in sound.
The level indicator will always be activate if the RMX is receiving/sending audio, regardless of whether or not you are applying effects.
I'm not sure I understand what the problem is. Please post a video in DropBox or a non-public video on YouTube and share the link here.
Sorry, maybe my english bad :)
Here i am recorded video: https://www.youtube.com/watch?v=TWVsj00LWsE
note: in same time ears not detects changing of level.
@Burzhuy > While this instruction set was written for the EFX-1000, the same details apply to the RMX-1000; chances are you simply need to turn the output knob down from its current position. There is no need to have them both at the same position (12 o'clock); you just need to have them so the levels match with no effect parameters engaged.