Wingo WG-1029
Strobe seems to be set to a value of 3 all the time. Can you confirm if this is the case and let me know if there is anything that needs done to fix it?
Thanks
Post is closed for comments.
@Wyatt > The "strobe" setting isn't used by rekordbox lighting at this time; it uses a signal to strobe the "shutter" or fixture light on and off to create the strobe. Have you tried changing the strobe value within the lighting macro?
So I have tested this with several lights the other lights work normally, but this fixture just flashes continuously. I went into the display panel on the light itself and can see that it is registering a value of 3 on the "strobe" channel. Is it possible this is the default value in the fixture profile?
According to the DMX listing you provided here, a value of 0-3 on CH8 should have zero-strobing (no change).
Thats what I was given by the manufacture, but that appears to be incorrect. Can this be corrected?
Rather than us poking around blindly, we'd need to be provided the correct values. If you're able to either determine them yourself or obtain them from the manufacturer, that would allow us to update the fixture profile.
Please set the value to 0, thank you.
Hello, was this ever corrected?
It would require you updating the rekordbox lighting database and testing it, as we don't have the fixture here to verify that it's updated and working as expected.
I was simply asking if my request had been completed. Please confirm if the default “strobe” value is corrected to “0” for this fixture in the rekordbox lighting database. Thank you.
Have you not updated and tested it?
No, waiting for confirmation that you guys have made a change before I set everything up to test