Craig Mulvaney
I have my iPad connected to the USB send/receive port, audiobus 3 on the iPad with phlox phaser as the effects app. In audiobus I have selected channels 1+2 as the input, then phlox phased as the effect and then the DJM as the output. Nothing works regardless of whether I have the effects selector as AUX or INSERT.
How is this supposed to Work?!?
Post is closed for comments.
The photo was either taken between blue blinks of the on/off button, or you have the wrong channel selected for the input on the FX section. If you're using it on AUX mode, you need to select a source; CH1, CH2, MIC, CF-A, or CF-B are the only options.
It was on (flashing), pic just didn't pick it up.
So is this the right setup? Asking as I couldn't hear any difference at all when changing wet/dry or feedback in the app
Okay, so when using it as AUX, with your source selected on the FX section and the S/R turned ON, the signal is sent to the Audiobus input, through the desired application, to the Audiobus output, then back into the S/R loop, which then comes back to the AUX channel - so you need to ensure that switch is turned to AUX and that your volume for it is turned up.