DJM 750 Multitrack Recording Phono channels

I finally found a way to record faders 1 and 4 into multiple/separate channels when both are running phono inputs.   

In the DJM interface software, set channel 1 to crossfader A, and channel 4 to crossfader B.  Then make sure to have your crossfader engaged and set to these outputs, keeping the fader in the middle.  Then, when recording into Logic / Audacity / etc. the two channels will come up separately. 

Thank. Fucking. God.

It was proven before this that when recording thru the phono channels, only a stereo recording off of the mains was possible.