Comentario oficial
The only difference between them is that EQ cuts the frequency to -26 while ISO cuts the frequency to -∞ essentially eliminating it completely.
Acciones de comentarios
Publicación
Seguir
XDJ-RX EQ/ISO Question
Just bought my RX and love it already, just a quick question regarding EQ/ISO:
I know that if the RX is set to EQ, the three, band knobs (where no cut or boost to frequencies are required) would be set to the 12 o'clock position but if I choose the ISO option should the knobs rest in the 12 o'clock position or be set fully clockwise? It is my understanding that ISOs are generally only used to cut gain (down to a point where that Hi/Mid/Low is essentially off) at a particular frequency rather then to boost it
Regards
George
La publicación no admite más comentarios.
Fecha
Votos
4 comentarios
So is the 0dB position at 12 o'clock or fully clockwise? If it's 12 then how many dBs boost is applied when you turn it up to fully clockwise?
George
Acciones de comentarios
It would be at the 12 o'clock position as the label on the EQ knob indicates that fully clockwise is +6dB.
Acciones de comentarios
I think you should be able to hear the different.....
Acciones de comentarios