Have a feature request or suggestion? Post your idea here!

Publicación

2 seguidores Seguir
0
Avatar

Pad color in MIDI map for Pioneer hardware

I have a made a .csv MIDI mapping for my DDJ-1000 so that I can use the new track separation FX part select. It works well, but is there a way to change the color of the pads from the default dim purple/dim white? On page 4 of the MIDI message list, it says "MIDI out: lit in specified color number. (1-127)". Can this be added to the .csv, and if so, where? For example, here are my assignments for the pads:

FXPartSelectDrumsOn,,Button,9935,,,,,9935,,,,,,FXIsoDrums
FXPartSelectDrumsOn,,Button,9D35,,,,,9D35,,,,,,FXIsoDrums
FXPartSelectVocalOn,,Button,9936,,,,,9936,,,,,,FXIsoVocal
FXPartSelectVocalOn,,Button,9D36,,,,,9D36,,,,,,FXIsoVocal
FXPartSelectInstOn,,Button,9937,,,,,9937,,,,,,FXIsoInst
FXPartSelectInstOn,,Button,9D37,,,,,9D37,,,,,,FXIsoInst

In the picture, the upper row of pads are the active part toggles (set using the Pad Editor), and the pads underneath them are the FX part select for the same part. I have toggled off FX on the drums here. Thanks.

Chris Carter

La publicación no admite más comentarios.

2 comentarios

0
Avatar

OK. I have another ticket open with a more pressing matter, so when that's resolved I'll open a new ticket about the MIDI color.

Chris Carter 0 votos
Acciones de comentarios Permalink