To update the firmware, I used the USB C cable.
Acciones de comentarios
Publicación
Seguir
FLX10 Software update
I used the USB C cable that comes with the controller. However I get a message to use USB A.
Is this needed or I should use USB C?
La publicación no admite más comentarios.
Fecha
Votos
2 comentarios
There are two USB sockets on the FLX10, labelled 'A' and 'B'
Both are USB type C sockets
It means plug into the A socket to update firmware (not to do with the type of USB connector)
Acciones de comentarios