Have a feature request or suggestion? Post your idea here!

Publicación

2 seguidores Seguir
0
Avatar

[SOLVED] Connecting RMX1000 to a behringer mixer...Help please!

Hi guys, new here so *waves* :-) Just bought my RMX1000 and absolutely love it. However, I need at the moment to hook this up to a behringer DDM4000 mixer. New mixer is on the shopping list, but one thing at a time and all that! At the moment, I am having to send the signal straight out of 1 CDJ direct into the RMX for the following reason; I have tried using the "Output A" as the input into the RMX, and then sending the signal out of the RMX, back into of the spare mixer channels (channel 4) to be precise. However, when I do this, and then try to apply some of the scene effects, I'm getting a either a hell of a lot of feedback, or very little action from the FX at all. Just to clarify, the mixer has no send/return and I'm doing everything using standard phono jacks. Can anyone help? I know it's not a problem with either the RMX or the mixer, as when I have the RMX being fed straight from the CDJ, there are issues and everything sounds sweeeeeet, but but I don't want to leave it this way as it only allows me to effect o e track :-( Can anyone advise..... Is it just an issue with levels, or am I doing something massively wrong? Thanks in advance peeps. Cheers, Chris

Christopher Kendrick

La publicación no admite más comentarios.

3 comentarios

0
Avatar

Without Send / Return on the mixer your only option is to connect the RMX 1000 to the master output or, as you did, to one of the CDJ's. I recommend the master output option so you can add effects to all channels, but with the limitation that it is to all of them at the same time.

The Henrik Maneuver 0 votos
Acciones de comentarios Permalink
0
Avatar

Ok, so if I a connecting to the master channel, where do I send the signal when it comes out of the RMX1000?

Christopher Kendrick 0 votos
Acciones de comentarios Permalink