Have a feature request or suggestion? Post your idea here!

Publicación

3 seguidores Seguir
0
Avatar

[SOLVED] Could someone tell me what audio connection RMX 1000

TRS Cables: I'm a bit lost as I look at directions hooking up and reading forums of loop issues and blowing my speakers and... Little cautious about what I read on these forums and all and the best way to hook them up. (Best way for best performance etc...)

What's the best way to hook up using RMX 1000 with DJM/CDJ 2000 Nexus with SDJ 08 speakers ALSO have 2 CDJ 2000Nexus

 Also, I noticed there is MONO written on the TRS connections??? TS cables???

what do I gain or loose using TRS VS RCA in this setup?

 

Justin time for some Hardstyle!

La publicación no admite más comentarios.

3 comentarios

0
Avatar

I believe using a trs would reduce the noise when you have the effect engaged in your DJM.

I currently have the rmx set up as send and return using normal patch leads, which are unbalanced. And whenever I have the send and return effects on my DJM , I can hear a faint buzz coming out from headphone and speakers.

Wen there is audio playing you can't really hear it but when there no audio , it sound pretty bad and the buzz will disappear when you switch off the send and return effects.

JCstudios 0 votos
Acciones de comentarios Permalink
0
Avatar

Another question I asked just like this discovering that unplugging the usb eliminates the signal noise.

Seems to be better when plugged into the main usb instead of a powered hub, but not an option for Macs with 3 usb ports.

Rick Hodgkins 0 votos
Acciones de comentarios Permalink
0
Avatar

The RMX is not designed to be connected via a USB hub - it is stated in the FAQs.

Gavin 0 votos
Acciones de comentarios Permalink