@Arthur > What version of Traktor are you running? What are your computers specs / setup?
Acciones de comentarios
Publicación
Seguir
Cdj 850 with traktor via usb sound cut problem
Hello! Since there are cdjs involved, Ill post this problem here and also in the NI Traktor forums.
Ive recently been testing cdjs 850 along with Traktor and I have been experiencing a weird situation. I was able to properly configure the cdjs on the traktor software, but when i press play, the song will play for around 20 secs then the sound will drop, no signal on the mixer channel, however, on the traktor software the track continues to play.
If I press play/pause on the cdjs, the signal returns to the mixer and keeps playing for another 20 secs, and I have to press play again
Has anyone run into this?
La publicación no admite más comentarios.
Fecha
Votos
8 comentarios
It is traktor scratch pro 2.0.01(R10169)
the laptop is a Dell Inspiron 1545
Pentium Dual Core T4400@2.20ghz
4gigs ram
Win 7 64 Home Premium
Acciones de comentarios
Try updating; 2.1.2 is the current version of Traktor.
Acciones de comentarios
Also, try increasing the latency setting in the audio configuration one step higher.
Acciones de comentarios
I am also experiencing the same problem with virtual dj. I read somewhere that it might be a fault from the USB hub that I use but it works well with my VMS4 and also DDM4000. It's a pity I bought such a nice and expensive cdj but can't use them.
Acciones de comentarios
@Christian > Then try another hub or connect them direct.
Acciones de comentarios
In my case, I dont use a hub, straight to the laptop
Acciones de comentarios
@Arthur > Try the tips located in this thread.
Acciones de comentarios