Well, given that the DJM350 doesn't have a soundcard, you would require a soundcard of some variety to output the audio from Traktor to the mixer. What you could do is mix internally in the software and send the master output from all four decks into the mixer (but it would be into just one channel and then you'd need some way of controlling the software mixing).
[SOLVED] djm 350 + traktor?
Sorry i'm a bit of a novice when it comes to hardware + software compatibility and such. So i'm currently running 2x CDJ 2000's with a DJM 350. I'm looking to expand to more than 2 channels now, and am wondering how i could expand to having 'virtual' (if that's what you call them) channels running through traktor on my computer, or do i just need to upgrade my mixer to a 4 channel one?
I hope that makes sense, appreciate your help.
La publicación no admite más comentarios.
I'm having trouble connecting my DJM 350 to my mac and traktor! My CDJ's 350 works fine! But the problem is I got the mixer to work but when the two decks is running a song and I drag the crossfader to the left the both decks works and when I drag it to the left none of the decks works!
@Dani > That's because you've got the audio configuration set incorrectly; you need to set the audio outputs to use EXTERNAL mixer mode and set the outputs for deck A to the CDJ connected to channel 1, and the outputs for deck B to the CDJ connected to channel 2. You can follow the instructions found here for setup of the aggregate device, and f ollow the instructions here to configure Traktor.