DDJ-SR glitching and acting strangely

@ PULSE

I noticed somthing on my SR

Left deck on top effects buttons the led  decrease a little in intensity like a power drain,not much..just a little

same thing a noticed at slicer button on top performance pads..

sometimes the led have a low blinking after the music,like a strobo.

you know what i mean ?

If you notice clearly also the keypads button look as though they are suffering for power.

The boards were replaced by a professional technician who does repairs for the cdj's but isn't an official pioneer agent. It wasn't done by me.

When the sounds drops off to during using the ddr, it is due to the diminishing power, because sometimes you can actually hear where it gets less and dies out.

most my issues happen on the left deck also.

So even though I see the same issue with the LEDs, for testing I used a POWERED USB hub, with the SR being the only device plugged in. Same issue. And actually, when I tried to adjust the pitch range on the right deck, it made the LEFT deck go into beat grid mode. 

I'm done with this thing. Two years of occasional use in my home studio, as a hobbyist, and it's no good? Gets worse when I don't even touch it?!

I'll put this thing on eBay for parts and go buy a set of 1200s and a Rane mixer. 

Role here is to help with issues and or find solutions, not close things unless a topic is cross posted or the like.  Before we elevate this to tech support, a question.

Are you hitting any keys when this happens, meaning do you type in shortcuts or tracks and then you get this issue?  Serato has a ton of key stroke shortcuts  that can trigger things so I just want to know what is happening around this problem so I can better direct you for a solution..

I usually have all my FX selected for deck 1. I've done this for a while, and its usually just when I select the FX 1 button on the right deck to trigger the effect. The decks will flash (like at power up) and all of the FX buttons on the left and right deck will activate at once (would be kinda cool if it was meant to be that way).

I played for an hour yesterday, not using any of the FX on my right deck at all, with no problem. I want to try with the Serato remote also, with the re-assignment, but I won't be able to until Monday.

I rarely use keystrokes on my MBP. At most it's usually the censor button. I do everything from my SR.

With mine it is with the sync button, but I have realised that it happens to almost all the buttons and even the led lights act strange. When I have my sampler light and press a key pad button anyone, it alomatically starts the both tracks from the beginning on each deck. The unit is not usuable after this keeps happening, and as I read the forum, a lot of us are getting this and not only on the ddj sr unit.

I usually don't use the computer software to type anything, and use the controller to select and paly all tracks so it isn't a computer error, all usb cables also work fine and works well with the cdjs so I know it isn't at fault.

@Ray > Did this happen after updating the SR's firmware to the latest version?

Mark,

It began last week on the immediately previous firmware and still occurs after I've updated it.

News ? Good news ? Nothing ?

Passed 2 weeks and nothing about the big problem...

No one has managed to solve the problem ?

I changed the Mixer assembly board as well as the right assembly board thinking it would solve the problem, and it didn't. It has to be something in the unit. Changing the board was an expensive experiment and still didn't solve the problem

@rballiram

Add me on facebook @ facebook.com/busy2k
or remus.alecu2k@gmail.com 

Is this going to be a covered repair or do we all have to pay for these out of pocket?

I don't have a pioneer agent in my country and have carried it to an unauthorized agent and they changed all the boards on the unit and it didn't fix the unit. The unit has the problem on more than 10 different laptops I use, and any computer I use.

What do you advice. All the boards have been newly changed and still the problems exists. I think those of you who carry it by the agent for repair will do the same, pay for the new parts and the problem will be solved temporarily and then return

it's kinda bullshit..

for a year and a half works perfectly..no freeze,no problems,nothing.

i make that stupid firmware upgrade and everything is fu**ed up for no reason.

that's not fair...

Now you come here and tell us,nobody cares,is not our fault,go to service and repair that piece of ....

Can you get information from the team in Japan on which part to change. Because I changed all the board and it didn't solve the problem. You going to send all these people to the technician who will do the same and get the same problem. In avoiding all this can you tell us what needs to be changed or repaired. Because I am sure it isn't the board, and all the knobs are working. Maybe I should change the usb or the computer.

@Ray > If you are under warranty, there would be no fee associated with the repair. Any repairs done outside of the warranty period may be subject to a repair fee, however that is at the discretion of the repair facility.

@rballiram > And that's exactly why it's difficult for the engineers to isolate the issue; it's not the same problem for every SR owner across a variety of computer configurations.

Unfortunately nobody here is authorized to provide you with technical repair instructions, as if we were to post information on repair, modification or disassembly of a product, a user may further damage their equipment or possibly injure themselves, and Pioneer DJ could be held responsible. You'll have to contact a technical support department, even if it's not in your country, for further information.

@busy2k > I'm sorry, but in your case specifically, they feel the failure timing was coincidental, not caused by the firmware update. Clearly this message doesn't say "nobody cares" because there were many Pioneer DJ employees and service members working to find the cause of this issue.

Do you have an email contact for the technical support department?

What country are you in?

Trinidad and tobago

And in which country did you purchase the DDJ-SR?

if I ship the unit to pioneer do you have an estimate of what the repair will cost?

on ebay new about year ago.

how do I check the warranty? under the unit have a number but one of the letters is missing from resting and moving the unit

Our standard product warranty is 1 year from date of purchse, but unfortunately eBay purchases are ineligible for warranty coverage.

Trinidad & Tobago are covered by the Latin America division; please contact them for information on repair facilities.

So today I decided to get some practice in, and figured I just wouldn't use those additional FX. 10 minutes in, I go to adjust the pitch selector to +16 and that deck switches to beat grid mode. And again, my cues and all are screwed. Really not happy with this or the response to everyone's issue being "go get it fixed on your own dime".

I've never taken this unit out of the house, and it's got a dedicated space in my room that never sees food, liquids or smoke. What's even worse is that I've been really contemplating moving back to vinyl and getting a pair of PLX-1000s.This doesn't help my decision.  

@Ray > A hardware failure is a hardware failure, it doesn't need to have a spill or rough transport to cause it.

I changed all the hardware in the unit already or the main assembly boards and it didn't fix the prolem, which cost more than 300us, I now have to ship it back to the usa for an agent to check it again, and I am sure it isn't hardware. When you guys pay and get yours back tell me what the issue was.