Have a feature request or suggestion? Post your idea here!

Publicación

3 seguidores Seguir
0
Avatar

No Fader start for CDJ2000NXS2?

Does the CDJ Nexus 2 not support DJM-900 fader start? My buddy today asked me what it was all about and I went to show him and couldn't get it to work. Obviously I turned on the buttons and switches to make it work being I never had an issue with my previous 2000's using the feature

BriChi Respondida

Comentario oficial

Avatar

Fader start was removed from the NXS2 system.

Mark Gallo
Acciones de comentarios Permalink

La publicación no admite más comentarios.

11 comentarios

0
Avatar

wow, i knew from the mixer but I didn't think from the CDJ also, Im using it with the first 900, not the NXS2, stinks it doesn't work, oh well

BriChi 0 votos
Acciones de comentarios Permalink
0
Avatar

If you look at page 29 of the CDJ 2000 NXS2 manual, you get a lengthy description of the "Fader Start" feature, under the heading "Operating the CDJ-2000NXS2 in combination with other devices" and sub-heading "Starting playback using a DJ mixer's fader (Fader Start)".

Can you please clarify whether the actual omission of Fader Start is something that will be fixed in a firmware upgrade?

Thank you.

 

 

DJ Fuzuli 0 votos
Acciones de comentarios Permalink
0
Avatar

Sorry, fader start capability was removed from the DJM-900NXS2, not from the CDJ-2000NXS2.  There are no plans to add fader start to the DJM-900NXS2.

Mark Gallo 0 votos
Acciones de comentarios Permalink
0
Avatar

I won't say that sounds fair, but glad to hear the CDJ-2000NXS2 hasn't suffered the same fate.

DJ Fuzuli 0 votos
Acciones de comentarios Permalink
0
Avatar

thats weird being i can't get fader start to work with my DJM900NXS1 and CDJNXS2

BriChi 0 votos
Acciones de comentarios Permalink
0
Avatar

Can you find the documentation in your CDJ manual, where it describes how to use the Fader Start function?

DJ Fuzuli 0 votos
Acciones de comentarios Permalink
0
Avatar

yessir, it describes how to have it set which is the same as the NXS when i had it set up. I never used the feature but i knew it was there and worked if needed

BriChi 0 votos
Acciones de comentarios Permalink
0
Avatar

Maybe your mixer settings have not been updated? You need to manually enable Fader Start on your mixer first. I had a DJM900SRT which worked after manually tweaking this in the mixer's menu. Note that the Fader Start buttons were enabled and seemed to be working before (they could be toggled on and would glow as if the feature was working), but moving the faders had no effect. After I went into the config menu, it worked. You'll need to refer to your DJM900NXS manual for the details on how to access and use its config menu, its fairly straightforward. Hope you find the option easily and turn it on.

DJ Fuzuli 0 votos
Acciones de comentarios Permalink
0
Avatar

I changed that when i got the mixer, I've had it working with the NXS 1 players so the mixer settings are good, thanks. ill check again this weekend, maybe a FW update to the mixer changed the setting back to off, who know, i never use it so i never looked, just had it enabled to play with once

BriChi 0 votos
Acciones de comentarios Permalink