Have a feature request or suggestion? Post your idea here!

Publicación

2 seguidores Seguir
0
Avatar

DJM-800 Broken

Hi everyone,
 
First a little background; last weekend I was playing a gig and the venue provided me with a stage and a table but there was no set so I had to bring my own set consisting of a DJM 800 and two XDJ-700's. Near the end of the gig, people started to climb on the stage and the table got accidentally knocked of the stage. I was able to catch my XDJ's but the DJM-800 fell down 3-4 feet. The circuit breaker got tripped and we had to end the gig.
Yesterday I started checking for damage and I didn't notice any major physical damage on the DJM apart from some minor scratches and bumps. But when I turned on the mixer and tried to play stuff I noticed the following issues:
 
- There is no sound coming from the master channel (also no indicator lights). Sometimes I get some sound from it when I wiggle the master knob or shake the mixer but then it cuts out again.
- Channel 3 keeps cutting out at random intervals (sometimes it works for 10 minutes, sometimes even longer, sometimes only for a few seconds)
- There is an enormous amount of noise coming from channel 1
- And the most shocking of all (pun not intended); when I touch any of the screws or headphone jack I get a major electric shock that actually hurts. I measured with a multimeter and there is actually 220v between ground and the metal body. However, it is not tripping the ground breaker.
 
I already ran diagnostics and all of the knobs, faders and buttons are working.
 
I'm wondering if it's going to be worth it to send it in for repair. I already contacted some local repair centers and they all ask around €40-50 euros for diagnostics because of the many issues. One of them said that it is almost sure the power supply will have to be replaced (which will already cost +200) because of the voltage leak. Is it worth repairing or should I buy a new mixer since this mixer is already 8 years old.
 
Thanks in advance.
Bram Laurens Respondida

Comentario oficial

Avatar

Yikes, that sucks.

It sounds to me like there was some kind of damage causing an electrical short from the mains power to the chassis of the mixer. It certainly needs a repair - and I would send the bill to the venue or promoter for failing to provide a safe and stable work space resulting in damage to your personal equipment. If you're considering buying a replacement mixer rather than the repairs, you should still give them a bill for the repair estimate total and put that money towards the new mixer.

Here's a link to contact Pioneer DJ technical support in your region to have your hardware inspected and/or serviced, depending on what you decide.

Pulse
Acciones de comentarios Permalink

La publicación no admite más comentarios.

Fecha Votos

1 comentario