Do they work or not work? Because here, you said they don't work at all.
chauvet intimidator scan 110
No colours or strobe settings seem to work with this moving head fixture. It only defaults to a slow white strobe no matter what signal is sent via the rb-dmx1. Please help.
reference guide on the site
Iniciar sesión para dejar un comentario.
It does not work. No light no move, nothing. But when I put the scan 300 I have white light.
Which version of the lighting database are you using? The current version is 1057
The addressing for the fixtures are quite different:
As you can see, the dimmer and shutter don't even overlap in either of those, and typically when you click on the fixture in the grid, rekordbox will open the shutter, put the dimmer to full, colour to white (or open)... Do you have your lights at the correct addresses and DMX channel modes?
Yes my scan mode is on dmx and my adress are the same as rekordbox adress
and I am at the latest lighting database
I found the problem I was on the 5 ch and not on the 11 ch on my fixture
And does it work properly now that you're using the correct fixture profile?
oui mais la couleur et le gobo ne changent pas