Have a feature request or suggestion? Post your idea here!

Publicación

8 seguidores Seguir
0
Avatar

decks 3 and 4 xdj-xz

anyone know how to toggle decks 3 and 4 on xdj-xz using rekordbox dj?

I hear its on the screen but cant see it!

James Connor Respondida

La publicación no admite más comentarios.

27 comentarios

0
Avatar

I found one way under Shift + Menu -- Utility, there's a toggle switch for decks 1/3 and 2/4 on the units' screen.

There's probably a better/faster way (I hope) as this is not very mixing friendly as is... but yet to find it while testing this unit.

Chris Mey 0 votos
Acciones de comentarios Permalink
0
Avatar

According to the Crossfader video you just double tap Shift.

Erik Minekus 0 votos
Acciones de comentarios Permalink
0
Avatar

Hmmm.. weird that it's not in the manual. Oh well, if that's a quick shortcut, that's even better. Thanks!

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

the double tap of shift doesnt work for me but that would be far more convenient than the process of hitting short cut then pressing each deck 

One thing that is bugging me and cannot fix even with shift time mode is on the main display I ahve the time remaining counting down, but on jog display it counts up...

 

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

@JAmes > I believe you can change that in the preferences; it's not switched automatically with the main deck time setting.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

press Shift twice does not work

StudioPro StudioPro 0 votos
Acciones de comentarios Permalink
0
Avatar

according to the comments section on crossfaders youtube review it says the double tap of shift is coming in a firmware update soon! 

he knows more than pioneer support it would seem. 

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

Given that I haven't had my hands on one yet ... apparently so! ;)

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

Is there an update on this. I have the same issue with my XDJ-XZ and cannot access deck 3 and 4 while my laptop is connnected. I can load songs into 3 and 4 in Rekordbox on the laptop but have no idea how to play them on the XDJ-XZ.

 

Chris Herben 0 votos
Acciones de comentarios Permalink
0
Avatar

When using usb drive on one side of xz and laptop on the other b2b, the rekordbox dj laptop user using the left hand side cannot access deck 3 via short cut menu, please can this be added?

 

Also it would be helpful in a 3 way b2b session, which I do a lot, that the rekordbox dj laptop user could use decks 3 and 4, while usbs 1 and 2 could be used for decks 1 and 2...thoughts?

 

Maybe some of this will be fixed with the firmware update that adds the double tap of shift to toggle decks?

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

@James > The double-tap-shift shortcut is coming in a future update, as is tapping the deck number within the display (which, oddly enough, was in the manual at the time of release, but not implemented as a function).

The shortcuts for the decks don't exist when the software and hardware are used in combination of stand-alone / control modes.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

ok, when is the update coming?

 

And will my suggestions be put forward?

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

@James > No date available for the update.

We can pass along the suggestion but there is no promise or guarantee it will be considered or included.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

Is there any way I can map the deck select to one of the pads in the meantime? It really is a pain having to go through the shortcut menu each time...

Harry Kirkwood 0 votos
Acciones de comentarios Permalink
1
Avatar

@Harry > As that's a hardware function, the answer is no.

Pulse 1 voto
Acciones de comentarios Permalink
0
Avatar

Crossfader showed the update with the double tap of shift over 3 months ago, why the hell cant we have it ffs?

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

Because that happened to be in a pre-release beta firmware, FFS.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

And I take it we can't get access to said beta firmware? :(

Harry Kirkwood 0 votos
Acciones de comentarios Permalink
0
Avatar

No, sorry - there are no public betas for the product firmware updates.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

Surely double tap of shift button does not take 4 months to test

James Connor 0 votos
Acciones de comentarios Permalink
0
Avatar

@pulse will There be an option to use stand alone on one and 2 combined with controller on 3 and 4?? This will be a VERY usefull b2b function instead of switching between 2 decks...

Emil Lock 0 votos
Acciones de comentarios Permalink
0
Avatar

I cant Get this to work, when i play with a USB stick and press link for controller function My only option us to change deck 1 or 2 to computer mode

Emil Lock 0 votos
Acciones de comentarios Permalink
0
Avatar

Yes, decks 3 and 4 would be computer - 1 and 2 would be controller for the software. You just had it backwards.

Pulse 0 votos
Acciones de comentarios Permalink
0
Avatar

Ok, il rephrace. Lets say i have My USB plugged in, playing a song on deck 2 as standalone. Then i want to play a song from rekordbox on deck 4 and prep it. When i do this the xz override standalone mode for both decks right hand side, and makes deck 2 and 4 controller mode wich stops the song on deck 2 from the USB.

Emil Lock 0 votos
Acciones de comentarios Permalink