Distortion on DJM 450 Mk2

Hi, I recently bought a DJM450 Mk2 mixer (used). I have been using it fine with my turntables and also with timecode vinyl but tonight I tried running my XDJ700's into it and there was a lot of distortion on the right side of channel 1. Channel 2 and Aux are fine.

What is likely to be the issue and can it be fixed?

Thanks Tom

Tom Burnell 19 de septiembre de 2021 19:22

Iniciar sesión para dejar un comentario.

Fecha Votos

6 comentarios

Hi Tom,

Did you possibly connect the XDJs into the PHONO inputs on the mixer?

Pulse 20 de septiembre de 2021 21:50 0 votos

No, definitely into the line-in's I had the phonos connected to my 1210s.

I tried switching around the XDJS and cables to eliminate them.

Tom Burnell 21 de septiembre de 2021 16:37 0 votos

Btw - trying to use this site on chrome doesn't really work very well - it's impossible to log in - even after i cleaned my cookies - and on safari it does let me log in but takes ages.

Tom Burnell 21 de septiembre de 2021 16:38 0 votos

Any advice on what this distortion could be?

Tom Burnell 3 de octubre de 2021 18:53 0 votos

If you already cross-checked the XDJs and cables, the only thing left is a hardware defekt on your DJM450.

Markus Marquardt 3 de octubre de 2021 23:05 0 votos

PS: Are you sure you have an DJM450 MK2? There is no "Mk2" of this model AFAIK.

PPS: If you mean DJM450 - I checked the schematics from the ServiceManual and in this model, the phone/line inputs do not share the same signal path, e.g. A/D converters. So your distortion may come from one of the line input ADCs not working correctly. However, nothing you can fix, this unit needs service.

Markus Marquardt 4 de octubre de 2021 20:46 0 votos