Manufacturer) CR LASER
Model Name) MOONSTAR MK11
Fixture type) Laser and Effect light
A link to the product website)
http://www.cr-laser.com/en_us/product/grating_motor_serie/MOONSTAR%20MK3.htmlA link to the product manual) You need to register to download so I have saved it to dropbox and supplied you with a link, the channels to use are on page 10.
https://www.dropbox.com/sh/vng53t933ywtcs9/AADsF0JZfq-Ci8O8IOe8ZIZka?dl=0
Thank you so much for doing the customization for the fixture, it is much appreciated. The laser is now working much better, however it still hasn't been added to the library correctly and therefore the features of the laser can be utilised further by having this added correctly. The laser is a 7 channel fixture not a six channel that you have added. If this could please be fixed that would be much appreciated.
I would also appreciate if you could please do a small customization to the channels as follows:
- Channel 1 - No changes required.
- Channel 2 - Please do not set the Function up as a Strobe, but set the Function up as "Red laser on" or "Red laser dimmer". Please ignore the fact that the Channel is called Red Strobe in the manual (as the features of the laser can be utilised further by having this set up as "Red laser on" or "Red laser dimmer"). Please set the channels when requested to turn "On" to be between 005-127 and "Off" 000-004.
- Channel 3 - Please do not set the Function up as a Strobe, but set the Function up as "Green laser on" or "Green laser dimmer". Please ignore the fact that the Channel is called Green Strobe in the manual (as the features of the laser can be utilised further by having this set up as "Green laser on" or "Green laser dimmer"). Please set the channels when requested to turn "On" to be between 005-127 and "Off" 000-004.
- Channel 4 - No changes required.
- Channel 5 - This is currently incorrect and should be changed from "LED Power" to "LED Rolling/Rotation". When changing this Channel please limit the output values for "Clockwise Rotation" to be between 10-65, the output value for "Stop" is between 128-133, and limit the output values for "Counter-clockwise Rotation" to be between 139-204.
- Channel 6 - This is incorrect and needs to be changed from "LED Strobe" to "LED Dimmer" (which is referred to as "LED Power" in the manual). The output values for Blackout is 000-004, and Dimmer Dark to Bright 005-255.
- Channel 7 - This is missing . This needs to be added as "LED Strobe".
Thank you very much for your assistance.
Kind regards,
Chris