Have a feature request or suggestion? Post your idea here!

Publicación

3 seguidores Seguir
0
Avatar

Pro dj link and expanded setup

Hey 😀 I have a tricky question, and this seems like the right place to ask. I have 1 Djm900nxs2, 2 xdj1000mk2 and one toraiz sp-16. They all work flawlessly together in pro dj link. But here is the tricky part. If i buy an additional Xdj xz, will they all work together in pro dj link and i can assign deck 1-4 across mixers? The connection will be like this: Both Xdj1000mk2, the Djm900nxs2 and the toraiz sp-16 goes directly into the ethernet switch. So will the xdj xz from the extension ethernet port or both of the channel 3 & 4 ethernet slots. So the setup will be using 5 or 6 ports in the switch. But the toraiz does not count as a player, because it can't take over the master bpm, it just collects bpm from the players, so it wont take up one of the 4 maximum pro dj link slots. Neither will the Djm900nxs2. So 4 decks in total. So then assigning decks 1-4 it would be 1 & 2 from the Xdj1000mk2s, and 3 & 4 from the xdj xz. And it will be all run from a computer in rekordbox export mode ofcourse. The xdj xz will run as 2 additional decks with its own mixer. This should theoretically work right? I have drawn a diagram here: https://ibb.co/h1NhRd4
BroTox Music

Comentario oficial

Avatar

Short answer: no.

There are certain combinations of gear that will work to "expand" the workflow, however the XDJ-XZ and DJM-900NXS2 are effectively trying to compete for the same mixer function. You could use the XDJ1000's with the XZ and that would be fine.

Pulse
Acciones de comentarios Permalink

Iniciar sesión para dejar un comentario.

2 comentarios

0
Avatar

Ok, thank you for a quick answer. That's what i thought also, it won't work with 2 mixers connected in pro dj link, because they will not cooperate. However, it would bee great if this setup did work. Because then I could
#1: play alone on 4 decks and 2 mixers, #2: play B2B 2 decks 1 mixer each or #3: have a partial portable setup, like; take the xdj xz, toraiz and the rmx1000 if I needed for a gig without destroying my whole studio.
I know that I can use the Xdj1000mk2s on the ethernet ports on the xdj xz for 2 additional decks, but I do already have everything on that picture plus an ddj sp1, but i haven't purchased the xdj xz yet. Because connecting the Xdj1000mk2 to a xdjz xz would make my Djm900nxs2 excessive.
You can check out my studio here, so you get the idea.. I wanted to swap the turntables for extra digital decks.
https://vm.tiktok.com/ZMN7cayFE/
https://www.instagram.com/p/ChZguRkFTu9/

So there is absolutely no way to set one mixer as master and the other one as a slave like the toraiz sp-16, or just collecting bpm over midi for example?

BroTox Music 0 votos
Acciones de comentarios Permalink