In Serato, have you checked the MIDI mapping in settings to see if it is engaged with the reverb turned on?
Publication
S’abonnerDJM S11 - reverb always enabled on channel 1
Issue: channel 1 on my djm s11 always has reverb engaged. This is a new phenomenon.
Theory: it appears to be mapped either to the crossfader OR the channel fader?? I can't tell because I can only hear it at volume.
Question: How do I turn off the reverb from always playing on channel 1 of my djm s11?
Cette publication n’accepte pas de commentaire.
5 commentaires
Hi. This fixed it. Thanks!
Hello. My brand new DJM-S7 is also experiencing this issue. Unfortunately, the MIDI mappings solution above does not work for me. Channel 2 plays music and sounds without reverb. I really want to exhaust all troubleshooting options before I initiate a return.
What else could I try to eliminate constant reverb on channel 1? I just want to hear a clean, dry signal. Thanks.
Hi, My issue came back. I reached out to Serato and they suggested I reset my Serato DJ preferences (see below). I tried it and it seems to work.
Could you please reset your Serato DJ preferences, as per the steps below:
- Close any running Serato software.
- Press 'Windows + R' on your keyboard.
- In the Run command box, type "regedit", and press enter.
- Once the Registry Editor is open, use the directory structure to navigate to the Serato folder; Computer/HKEY_CURRENT_USER/
SOFTWARE/Serato - Right-click on the 'Serato' folder and re-name it to 'SeratoOLD', as per the image below;
Note: It's very important to be careful when editing your Registry, as it can have a potentially adverse effect on your operating system. You can make a back-up and restore it if you are anxious about making changes, by viewing the Microsoft article here.
After I changed this, I just started Serato again and it seems to work.
Let me know how you get on!
Thank you for these instructions. At first, they worked perfectly...until I started resetting my audio preferences when the reverb returned.
After some trial and error, I figured out the following setting that causes the reverb on channel 1.
In Serato DJ Pro, navigate to:
Setup > Audio
Then uncheck the box that reads: [ ] Use Laptop Speakers
Doing this eliminated the persistent reverb in channel 1 for me.