First you must set Fader Start function on in Mixer setup settings. (see page 22 of your user manual)
[SOLVED] DJM-900 Fader start problem
As the title says I'm having some problems with the fader start function on the djm 900 nexus mixer.
1x DJM-900 Nexus
1x Netgear Hub.
Link is working fine - links usb perfectly, the platter turns red and the quantize function works as well...
The Fader Start buttons doesn't really seem to work though.
When I press them the lights begin and then nothing happens when i use the cross-fader.
- I've tried to set the line's im using to both a and b, and tried the cross-fader again, but there is no effect "start" effect. - it only works as it normally does.
Any clues to whats wrong?
Cette publication n’accepte pas de commentaire.
I have the same issue. Can someone help please?
I have turned on the FS from the utility menu on the DJM 900 and push the button 1-4 and nothing happens. I am using digital cables to connect the 2 cdjs to the mixer, if that matters.
Fader start on the DJM900 works over the ProDJ Link. I'm assuming you all have a network cable connecting the three units....?
yes everything is hooked up right.
CDJs have an Ethernet cable going to a 5 port switch and DJM has a Ethernet cable going to the same switch and the switch hooked up to the laptop using another Ethernet cable. I know it's all hooked up right because the link works with the same cables and setup in RB.
Is there anything to turn on on the CDJ? I couldn't find anything on that.
Thanks for the response.
if you're using 1 and 4 make sure your decks are set to deck 1 and deck 4 in the CDJ menu
If they are, make a quick video of what you are doing, maybe we can pickup on something that is wrong
Thanks for the replies guys. Problem solved.
I did not change anything and everything worked tonight. I guess all I had to do was reboot everything after I made the change.