Have a feature request or suggestion? Post your idea here!

Publication

4 abonnés S’abonner
0
Avatar

19" Rack kit for the DJM 900

Did a 19" rack mounting kit ever surface?

The only thing I found on google is this http://www.pioneerelectronics.com/PUSA/DJ/Accessories-and-Software/CP-900

But you can't still buy it.

Maybe some one have an other solution????

Iwan Vervoort

Vous devez vous connecter pour laisser un commentaire.

34 commentaires

0
Avatar
  1. I would say just from looking at it, 5 maybe 6 rack spaces

  2. you mean the plastic bezzle that says DJM-900?

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

if the calculations are correct:

1 rack U is 1.79 inches, the 900 is 16 inches deep so thats about 8 rack spaces

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

1 rack unit = 1 3/4 inches (or 1.75")

 

Yes I mean the plastic front bezel that has 'Pioneer' on the front and DJM-900 Nexus on the top.

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

yes, the front bezzle consists go 5 screws that easily come out in the front and the bezzle will slide right off

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

With the front bezel off can you see into the inside of the mixer or is there a metal cover?

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

it's metal, that bezzle is literal just for show, there may be a small hole here and there but nothing to worry about

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

if you look in the parts diagram, it looks like the attached pic when off

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

With the front bezel removed, what is the depth of the metal case?  Is it still 16 inches?

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

not sure, just measure yours, you can see on the mixer where the plastic meets the metal

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

I do not own a DJM-900 yet, that is why I am asking

 

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

LOL, oh ok, if I was home I could tell ya, sorry. If no one responds, I will measure once I get off work tonight

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

the front bezzle adds exactly 1 inch, just measured.. 14 inches without, 15 with. I guess they measure it at 16 to account for plugs in the back

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

12.5 inch width? Really? The Pioneer spec say 13" width

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

yeah, maybe they leave a little room in the measurements, I'm not sure, but I now I just measured 15-1/2 plus if it was 16, my case would not have fit it, its bad enough how tight the case is because they added the 1/2 inch from the 800 to the 900

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

So at 14 inches deep without the bezel would require 8 rack spaces plus the extra room for the the connections.

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

How warm does the Djm-900 run to consider in placing in a tight fitting case?

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

not too crazy, The bottom was getting pretty warm so I installed a small us fan to vent the hot air out the bottom just to play it safe

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

Can anyone else with a DJM-900 confirm that the actual Width of the DJM-900 is 12.5 (12 1/2) inches and not 13 inches?

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

what do you think my tape measure is wrong? LOL... j/k. a second measure never hurts

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

I'm just wondering why Marathon made a special case (model MA-DJM900) just for the DJM-900 and Odyssey recently modified their 12" case to make a bigger to hold a DJM-900 and well as all the Pioneer specs and manual say the DJM-900 is 13 inches wide.

PS 0 votes
Actions pour les commentaires Permalien
0
Avatar

its modified because it is bigger then the 800, not by much though but I guess enough to have to make a different case

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

and I hope they're not charging more for their "custom designed" 900 case because all you need to do is cut the foam a tiny bit on each side and its fine, it's exactly what I did when I went from the 800 to the 900, its a minimal increase

BriChi 0 votes
Actions pour les commentaires Permalien
0
Avatar

The DJM 900 is exatly 13" wide, I had to modify my new odessey case when i bought it because at the time Odessey UK didn't have a case to fit the 900 and the import costs from the US were stupid prices

MrChukkel 0 votes
Actions pour les commentaires Permalien
0
Avatar

ill have to remeasure again, maybe my ruler is broke, lol

 

but see, just modify the current case, don't buy a whole new one, such a waist of money

BriChi 0 votes
Actions pour les commentaires Permalien